Initial Operation - Cleco 936491PT Bedienungsanleitung

Initial operation

3
2.2.1 Operating status
LED
Charger
Lights up
Flash 2 Hz
Lights up
3 Initial operation
WARNING!
Risk of explosion if other batteries are used
Use only to charge CLECO lithium ion batteries, order no. 936400PT or order no. 935377.

Never use to charge other battery types.
22
Graphic Status
Off
Power supply
connected
Error charger,
see 4 Troubleshooting
Defect,
see 4 Troubleshooting
P2069BA/INT 2015-08
EN
LED
Battery Graphic
Lights up
Flash 0,5 Hz
Flash 1 Hz
Flash 2 Hz
Lights up
Connecting the charger to the power network:

LED lights up green and indicates that
power is supplied.
Plug the battery into the charger and make

sure that it is securely connected.
LED is flashing green, indicating that
charging is in progress.
Status
Off – No battery contact
Battery is charged
Battery charging,
charge state > 80%
Battery charging,
charge state < 80%
– Only 44 V –
Error battery,
see 4 Troubleshooting
Defekt battery,
see 4 Troubleshooting
2069b_1_5_en_bedingt.fm, 25.09.2015