Axis P1365-E Installationsanleitung Seite 23

1
Network connector (PoE OUT)
2
Network connector (PoE IN)
8. Make sure that the camera and housing LEDs indicates the correct condition. See LED
Indicators.
9. Loosen the bracket adjustment screw to aim the camera to the point of interest. For
information about how to view the video stream, see Access the Product
10. Remove the plastic wrapper from the desiccant bag and put the desiccant bag below
the lens.
1 Desiccant bag
11. Close the housing. Make sure to alternately tighten the bottom cover screws a few turns
at a time until they are tight (torque 1.5 Nm). This will help ensure that the bottom
cover gasket is compressed evenly.
NO NO TICE NO TICE TICE
Make sure not to pinch any cables when closing the housing.
AXIS P1365-E Network Camera
23
1
2
1