Axis P1365-E Installationsanleitung Seite 19

NO TICE NO NO TICE TICE
If the network cable has a premounted network connector, remove the cable gasket and
use the connector guard to prevent tearing of the cable gasket. Avoid using network
cables with capped network connectors because they could cause tearing of the cable
gasket despite using the connector guard.
4. Pull the network cable back slightly so that the cable gasket adjusts itself on the cable.
NO TICE TICE
NO NO TICE
Not pulling the cable back could cause water to seep in and damage the product.
5. Make sure that the cable gasket is fitted properly.
6. If connecting an auxiliary device, for example an I/O, audio, or external power device, to
the camera, repeat the steps above as applicable to the specific device.
NO TICE TICE
NO NO TICE
Mount the connectors after the cables are pushed through the cable gasket.
7. Put the bottom cover on the wall mount and tighten the screws (torque 2 Nm).
AXIS P1365-E Network Camera
19