SOLIS Juice Fountain Compact Bedienungsanleitung Seite 37

L OCKAB LE SPO UT ON THE
JUI C ER BO WL
You can lock the spout to prevent dripping
out after pouring out the juice.
Locking the spout:
Turn it in a clockwise direction
all the way shut.
Opening the spout:
GB
Turn it in a counter clockwise
direction all the way shut.
A SS E M B LI N G T H E J U I CE R
▲
ST EP 1:
Place the motor unit on a dry, stable, moisture resistant and level work surface
●
with a power socket nearby. The clasp should be placed on the side with the
spout recess.
ST EP 2:
Place the juicer bowl on the motor unit. The spout of the juicer bowl must be
●
placed in the corresponding recess in the motor unit, the four knobs on the juicer
bowl automatically slide into place in the rubber coated recesses.
72
ST EP 3 :
Place the sieve in the juicer bowl. Firmly press down on the edge of the sieve
●
to make it audibly lock into place in the juicer bowl. Caution: Never touch the
grinding blades in the sieve, only touch the sieve by the raised edge! The grind-
ing blades are sharp, risk of injury!
ST EP 4 :
Place the cover with the funnel on the juicer bowl. The cover for the pomace
●
container should be directed in the direction opposite from the spout. The cover
should completely glide into the juicer bowl, the pomace container cover is
placed exactly above the bulge of the bowl. The two nibs to the left and right
of the bulge on the juicer bowl are placed within the cover.
GB
73