Specifications; Specific Safety Rules - Makita HP1630 Bedienungsanleitung

ENGLISH
1-1. Switch trigger
1-2. Lock button
2-1. Reversing switch lever
3-1. Action mode change lever

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
4-1. Side grip
5-1. Chuck key
6-1. Sleeve
6-2. Ring
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Safety class
) : 97 dB(A)
pA
) : 108 dB(A)
WA
value (tri-axial vector
2
) : 17 m/s
h,ID
2
2
) : 2.5 m/s
h,D
2
HP1630
16 mm
13 mm
30 mm
0 - 3,000
0 - 45,000
296 mm
1.9 kg
ENE039-1
EC-DECLARATION OF CONFORMITY
Model; HP1630,HP1631
We declare under our sole responsibility that this
product is in compliance with the following standards of
ENF002-1
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
000230
ENG102-1
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
ENG203-1

SPECIFIC SAFETY RULES

sum)
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to hammer drill safety rules. If you use this power
tool unsafely or incorrectly, you can suffer serious
ENG301-1
personal injury.
1. Wear
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tools by insulated gripping
surfaces when performing an operation where
3
7-1. Depth gauge
7-2. Side grip
7-3. Grip base
9-1. Blow-out bulb
/II
CE2007
Tomoyasu Kato
Director
ear protectors with
HP1631
16 mm
13 mm
30 mm
0 - 3,000
0 - 45,000
295 mm
1.9 kg
/II
ENH101-8
GEB003-2
impact drills.