Intended Use; Delivery Content; Features And Functions - Renkforce 1761858 Bedienungsanleitung

3. Intended use

The deep well pump is intended for private use such as the hobby gardens. The product is not suitable for the
operation of irrigations or irrigation systems in professional, industrial or public areas (e.g. gardens).
Only clear, clean fresh water is allowed as the pumped liquid. The temperature of the pumped liquid must not exceed
+35 °C.
The pump serves e.g. for water supply of suitable equipment in the garden via private wells (groundwater) or for
pumping in the container (rainwater cistern).
The pump is connected directly to the power cord via the safety plug located on the power supply.
The pump is waterproof according to protection class IPX8 and is operated in at least 28 cm deep water. A lower water
level will damage the pump, as it is not protected against dry running.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause hazards such as a
short circuit, fire or electric shock. Read the operating instructions carefully and store them in a safe place. If you pass
the product on to a third party, please hand over these operating instructions as well.
All company and product names included herein are trademarks of their respective owners. All rights reserved.

4. Delivery content

• Deep well pump
• Nylon rope
• Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.

5. Features and functions

• Deep well pump with 20 m long power cord and housing made of stainless steel
• Protection class IPX8 for the pump
• Max. flow rate 4500 L/h
• Max. discharge head 60 m
16