OHAUS Scout Bedienungsanleitung Seite 7

USB Device Interface
Note: The termination characters field contains CRLF, four CRLF, depending on
the FEED menu setting
Output examples: (Note: * and _ indicate spaces)
*****192.21_****g_*_**
*******0.01_****g_?_**
*******95.0_****g_*_*N
******169.6_****g_*_*G
*******95.0_****g_*_*N
*******74.6_****g_*_*T
USB DEVICE INPUT
The following interface commands will be acknowledged by the Balance. They are
case sensitive. The balance will return "ES" for invalid commands.
Command Function
IP Immediate Print of displayed weight (stable or unstable).
P Print displayed weight (stable or unstable).
CP Continuous Print.
SP Print on Stability.
SLP Auto Print stable non-zero displayed weight.
SLZP Auto Print stable non-zero weight and stable zero reading.
xP Interval Print x = Print Interval (1-3600 sec) 0P ends interval Print
0P Turn off Auto Print
H x "text" Enter Header line , where x = line number 1 to 5, "text" = header
H
text up to 24 alphanumeric characters
F x "text" Enter Footer line , where x = line number 1 to 2, "text" = footer
F
text up to 24 alphanumeric characters
Z Same as pressing Zero Key
T Same as pressing Tare Key.
xT Establish a preset Tare value in displayed unit. x = preset tare value.
Sending 0T clears tare (if allowed).
PT Prints Tare weight stored in memory.
PM Print current application mode (weighing mode).
xM Set current application mode to x. x depends on application
1M: WEIGH, 2M: COUNT,3M: PERCENT, 4M: CHECK, 5M: DYNAMIC, 6M:
TOTAL, 7M:DENSITY, 8M: HOLD, 9M:MOLE
M Scroll to the next enabled mode.
Print Current weighing unit: g, kg, lb, oz, etc....
PU
xU Set balance to unit x: g, kg etc.
1U: g, 2U: kg,3U: ct, 4U: N, 5U: oz, 6U: ozt, 7U: dwt, 8U: lb, 9U:lb:oz, 10U:
grn, 11U: thk, 12U: tsg, 13U:ttw , 14U: tola, 15U:c
U Scroll to the next enabled unit.
ON Brings out of Standby
OFF Goes to Standby.
A.Print: off; Stable: off
Sable reading
unstable reading
A.Print: off; Stable: on
Content / Result -> on
Content / Gross -> on
Content / Net -> on
Content / Tare -> on
EN-5