Display Off / Auto Off / Memory Function; Remote Control - Fakir premium VC 70 DC Bedienungsanleitung

Timer
Display off
Auto off
Memory function

Remote control

34
Operation
Hold "+" , "-" button to switch the time continuously.
When setting proper time, press "Timer/Preset" button
to confirm. The indictor will be on. When the timer is
reached, the fan will enter into standby status.
Timer ON:
Under standby status, press "Timer/Preset" button
on the control panel or remote controller and then
Timer/Preset indicator will flash. Press "+" , "-" but-
ton on the control panel or remote controller can set
preset ON. When setting proper time, press "Timer/
Preset" button to confirm. Follow the same steps as
described above.
(During timer setting process, when there's no oper-
ation for consecutive 5s., it will exit the timer setting
mode. The digital tube display the notch and "Timer/
preset" indicator will be off. When timer function is
turned on, the nixie tube displays the time. 5s. later,
it switches to display the notch. When the nixie tube
displays the notch, press "Timer/Preset" button and
the nixie tube will change the time. Hold "Timer/Pre-
set" button for 2s to cancel the timer. The indicator will
be off.)
Under working status, if there is no operation for 40s,
all the indicators will turn off. Press any button (except
"ON/OFF" button) can reactivate the indicator.
If there's no operation (including control panel and
remote controller) for consecutive 15h under any wor-
king status, the fan will be turned off automatically.
When the unit is turned off (but it's still energized),
it will memorize current operation status. When the
unit is turned on again, it will operate in memorized
operation status.
All functions can also be operated via the remote
control.