Operation; On/Off; Modes - Fakir prestige TVC 360 Bedienungsanleitung

on/off

Modes

35

Operation

CAUTION!
Do not place the appliance directly next to any heat
sources and avoid exposure to direct sunlight. Heat
may cause damage to the cooling fan.
When first plug in, the fan with "Beep Beep" sound
alerts, then the fan will under standby status, in which
no button and LED indicator light works
1. :press this key for opening up the fan, and
LED would light up, but oscillation and timer
wouldn't work. The default set is Normal mode
and Medium speed, (LED displays Low speed
instead of Medium speed), then running with Low
speed after 3sec. Pressing
standby mode.
2. : represents MODE key. The default mode
is Normal wind mode, but its relevant LED light
would not indicate. Press
modes among Normal, Natural and Sleeping wind
mode, which transformation sequence is: Normal
→ Natural → Sleeping →Normal. LED display
would make corresponding adjustment when
operating relevant mode, but LED wouldn't light in
the Normal mode.
Normal mode:
High wind speed
Medium wind speed
Low wind speed
Natural mode
The fan would automatically shift from
High → Medium → Low wind speed, which imitates
natural blowing pattern to make the wind be more
comfortable and soft.
There is specific program waveform graph of Natural
wind mode as followed:
again, turning into
that can transfer
high -----
medium ----
low ----