Power On / Off The Fan; Display; Fan Speed; Rotation - Fakir TVL 90 Benutzeranleitung

GB
1. Remove the fan from the packing.
2. Place the fan on a flat, level and stable surface and plug into 220-240V~50Hz power
socket.

3. Power On / Off The Fan

The fan can be turned by pressing the POWER button on the fan control panel or using
the supplied remote control. The POWER button is also used to turn the fan off.

4. Display

When the device open, the screen automatically displays the current temperature.

5. Fan Speed

Pressing 'SPEED' button on the control panel or supplied remote control will cycle the
fan through 3 comfort speeds(High/Medium/Low) until the desired speed is selected..

6. Rotation

The fan can operate in rotation or staionary mode. Press the ROTATE button on the
control panel or the supplied remote control to start oscillation. To turn ROTATION off,
simply press the ROTATION button once more.

7. Timer

Pressing 'TIMER' button on control panel or the supplied remote control sets the timer
in increments of 1 hour to a maximum of 8 hours. After the timer runs out, the fan will
automatically shut off.

Remote Controller Instruction

1. Insert 1xCR2025 button battery (included) into the back of the remote control.
2. Pull the insulation film out from the backside of the remote control before use it.
3. The remote controls all the functions as the base unit for convenience. Follow the
same instructions above to operate the fan remotely.
NOTICE!
The remote control must be pointed towards the receiver
on the fan in order to work. Do not mix new and old
battery.
1. Please take out the battery for long time no use.
TVL 90
16