Power-on / off
Horizontal blowing
direction (oscillation)
Operation
ATTENTION!
Do not place the appliance directly next to any
heat sources and avoid exposure to direct
sunlight. Heat may cause damage to the cool-
ing fan.
The pushbuttons for selecting the desired fan speed
can be found on the foot base of the VC 29 or on the
VC 45 S operating panel.
VC 29
Switching step 0
Switching step 1
Switching step 2
VC 45 S
Switching step 0
Switching step 1
Switching step 2
Switching step 3
The cooling fans are equipped with an automatic swivel
device for horizontal swiveling.
The swivel range is approximately 75°.
The button [O] switches from "Stationary" to
"Oscillation" and vice versa, also when the appliance
is in operation.
O
Button pressed
Button pulled out
The oscillation speed is faster or slower depending on
the selected speed.
If the direction of the fan is not to your liking, you can:
a) if oscillation is switched on, pull out the button [v]
when the motor element is in the right position.
b) if oscillation is switched off, set the position of the
motor element through "rotation" to the right or left
as desired.
ATTENTION!
Never twist the motor head by force.
OFF
=
Low speed
=
=
High speed
OFF
=
=
Low speed
Medium speed
=
High speed
=
Oscillation ON
=
Oscillation OFF
=
en
11