Carry out steps 12 to 14 for both doors.
12.
Pull soft stop mechanism downwards.
The soft stop mechanism will then con-
tract.
13.
13.
Pivot soft stop mechanism to the left.
14.
Screw the angle brackets onto the underside of the door using
4 x 15 screws.
Push the bracket to the back as far
as it will go, then tighten the screw.
94
15.
Mounting the refrigerator panel
Place the door panel on the adjusting screws and align in the centre.
Screw the nuts onto the adjusting screws and tighten.
To do so, use the ring spanner provided.
12.
15.
16.
Close the door and check the position
of the door panel.
16.