Electrolux IK261BR Benutzerinformation Seite 93

7.
Open the refrigerator door.
Unscrew the retaining bracket with the mounting strips.
To do so, use the ring spanner pro-
vided.
Important
When removing, ensure that the mounting strips do
not move.
Mounting the panel attachment elements on the re-
frigerator panel - model IK261B
8.
Position the retaining bracket in the middle of the door panel and
secure to the door panel using six 4 x 15 screws.
8.
10.
Attach the retaining plates to the door
panel using three 4 x 15 screws per
plate.
Important
Fit the unit handle to the panel at this stage.
7.
9.
Slide the cover onto the retain-
ing bracket from the side.
9.
10.
Mounting the panel attachment elements on the re-
frigerator panel - models IK311B, IK321B and IK323B
8.
Position the retaining bracket in the middle of the door panel and
secure to the door panel using six 4 x 15 screws.
8.
10.
10.
Attach the retaining plates to the door panel using three 4 x 15
screws per plate.
Important
Fit the unit handle to the panel at this stage.
11.
Pull out the mounting strips.
They will be required to mount the freezer
panel.
9.
Slide the cover onto the retain-
ing bracket from the side.
9.
IK311B
A = 683 mm
IK321B
IK323B
A = 809 mm
10.
11.
GB
93