Technische Eigenschaften - Ecler Dante DN44BOB Bedienungsanleitung

9. TECHNISCHE EIGENSCHAFTEN

DSP
Latency (fs = 48kHz)
AD/DA Converters
Latency (fs = 48kHz)
Analog Input/Output
Analog Input headroom
Input sensitivity @ 0dBV out
Frequency response (-3dB)
THD+Noise @ 1kHz, 0dBV input (line)
THD+Noise @ 1kHz, -40dBV input
Output Noise floor FFT (20Hz - 20kHz)
Interchannel crosstalk (20Hz - 20kHz)
Channel Leakage (20Hz - 20kHz)
CMRR 20Hz- 20kHz
DANTE® Audio Interface
DANTE® Network Inputs/Outputs
Cable length between devices
DSP 32bit
Sampling Rate 44.1/ 48 / 88.2 / 96 kHz
1ms
Resolution 24bit AKM
Dynamic Range AD:110dB; DA: 115dB
AD 0,81ms; DA: 0,56
4 Input/Output Phoenix connector (Symmetrical)
+27dBV = +30dBu
Max. output level +18dBV = +21dBu
From -50dBV to +10dBV in 0.5dB step
Input Impedance Balanced, >4kΩ
Phantom power +18VDC, 5mA max. software switched
5Hz to 24kHz
Flatness better than ±0.1dB
<0.004%
<0.008%
(mic.)
better than 115dB
better than 90dB (100dB typ.)
better than 100dB (115dB typ.)
65dB typ.
4 / 4
Latency 1 / 2 / 5ms (selectable)
Connector 1 x RJ45
100m CAT5 or CAT5e/CAT6
11