Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 40
Version 1.0
Published January 2019
Copyright©2019 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK B365 Pro4

  • Seite 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply) The terms HDMI®...
  • Seite 3: Motherboard-Layout

    B365 Pro4 Motherboard Layout RGB_LED2 CPU_FAN1 ATX12V1 USB 3.1 Gen1 T:USB3_1 B: USB3_2 USB 3.1 Gen1 T:USB31_TA_1 B: USB31_TC_1 CHA_FAN2/WP B365 Pro4 USB 3.1 Gen1 Top: T: USB3_3 RJ-45 B: USB3_4 CPU_FAN2/WP Ultra M.2 PCIe Gen3 x4 CROSSFIRE PCIE1 PCI Express 3.0...
  • Seite 4 No. Description ATX 12V Power Connector (ATX12V1) CPU Fan / Waterpump Fan Connector (CPU_FAN2/WP) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) RGB LED Header (RGB_LED2) ATX Power Connector (ATXPWR1) USB 3.1 Gen1 Header (USB3_5_6) SATA3 Connector (SATA3_3) SATA3 Connector (SATA3_2)
  • Seite 5 B365 Pro4 I/O Panel No. Description No. Description USB 2.0 Ports (USB_1_2)* USB 3.1 Gen1 Ports (USB3_3_4) D-Sub Port USB 3.1 Gen1 Type-C Port (USB31_TC_1) USB 3.1 Gen1 Type-A Port (USB31_TA_1) 10 USB 3.1 Gen1 Ports (USB3_1_2) LAN RJ-45 Port**...
  • Seite 6 *** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi- channel audio feature through the audio driver. Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager. Function of the Audio Ports in 7.1-channel Configuration: Port Function...
  • Seite 7: Package Contents

    ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Seite 8 1.2 Specifications • ATX Form Factor Platform • Solid Capacitor design • Supports 9 and 8 Gen Intel® Core Processors (Socket 1151) • Supports CPU up to 95W • Digi Power design • 8 Power Phase design • Supports Intel® Turbo Boost 2.0 Technology • Intel®...
  • Seite 9 B365 Pro4 • Supports Intel® UHD Graphics Built-in Visuals : Intel® Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® UHD Graphics • DirectX 12 • HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit,...
  • Seite 10 Gen3 x4 (32 Gb/s)** ** Supports Intel® Optane Technology ** Supports NVMe SSD as boot disks ** Supports ASRock U.2 Kit • 1 x COM Port Header Connector • 1 x TPM Header • 1 x Power LED and Speaker Header • 2 x RGB LED Headers...
  • Seite 11 • Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM, VPPM, PCH 1.0V, VCCSA, VCCST • Microsoft® Windows® 10 64-bit • FCC, CE Certifica- • ErP/EuP ready (ErP/EuP ready power supply is required) tions * For detailed product information, please visit our website: http://www.asrock.com...
  • Seite 12 Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense.
  • Seite 13 B365 Pro4 Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Seite 14: Installing The Cpu

    2.1 Installing the CPU 1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
  • Seite 15 B365 Pro4...
  • Seite 16 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Seite 17 B365 Pro4 2.2 Installing the CPU Fan and Heatsink...
  • Seite 18 2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs. 2.
  • Seite 19 B365 Pro4...
  • Seite 20 2.4 Expansion Slots (PCI Express Slots) There are 4 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Seite 21 B365 Pro4 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper...
  • Seite 22 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Seite 23 B365 Pro4 Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 13) header. PLED+ PLED+ PLED- Serial ATA3 Connectors These six SATA3 (SATA3_0: connectors support SATA see p.1, No.
  • Seite 24 Front Panel Audio Header This header is for PRESENCE# MIC_RET (9-pin HD_AUDIO1) connecting audio devices OUT_RET (see p.1, No. 26) to the front audio panel. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly.
  • Seite 25 B365 Pro4 CPU Fan Connector This motherboard pro- FAN_VOLTAGE CPU_FAN_SPEED (4-pin CPU_FAN1) vides a 4-Pin CPU fan FAN_SPEED_CONTROL (see p.1, No. 3) (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3.
  • Seite 26 Thunderbolt AIC Please connect a Thunderbolt™ Connector add-in card (AIC) to the (5-pin TB1) Thunderbolt AIC connector via (see p.1, No. 27) the GPIO cable. *Please install the Thunderbolt™ AIC card to PCIE3 (default slot). RGB LED Headers RGB header is used to connect (4-pin RGB_LED1) RGB LED extension cable which 12V G R...
  • Seite 27 B365 Pro4 2.7 M.2 WiFi/BT Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key E) supports type 2230 WiFi/BT module.
  • Seite 28 Step 3 Gently insert the WiFi/BT module into the M.2 slot. Please be aware that the module only fits in one orientation. Step 4 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.
  • Seite 29 B365 Pro4 2.8 M.2_SSD (NGFF) Module Installation Guide (M2_1) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1) supports M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
  • Seite 30 Step 3 Before installing a M.2 (NGFF) SSD module, please loosen the screws to remove the M.2 heatsink. Step 4 Prepare the M.2 standoff that comes with the package. Then hand tighten the standoff into the desired nut location on the motherboard. Gently insert the M.2 (NGFF) SSD module into the M.2 slot.
  • Seite 31 B365 Pro4 M.2_SSD (NGFF) Module Support List (M2_1) Vendor Interface ADATA SATA3 AXNS330E-32GM-B ADATA SATA3 AXNS381E-128GM-B ADATA SATA3 AXNS381E-256GM-B ADATA SATA3 ASU800NS38-256GT-C ADATA SATA3 ASU800NS38-512GT-C ADATA PCIe3 x4 ASX7000NP-128GT-C ADATA PCIe3 x4 ASX8000NP-256GM-C ADATA PCIe3 x4 ASX7000NP-256GT-C ADATA PCIe3 x4...
  • Seite 32 SATA3 VLM100-120G-2280B-RD V-Color SATA3 VLM100-240G-2280RGB V-Color SATA3 VSM100-240G-2280 V-Color SATA3 VLM100-240G-2280B-RD SATA3 WDS100T1B0B-00AS40 SATA3 WDS240G1G0B-00RC30 PCIe3 x4 WDS256G1X0C-00ENX0 (NVME) PCIe3 x4 WDS512G1X0C-00ENX0 (NVME) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Seite 33 B365 Pro4 2.9 M.2_SSD (NGFF) Module Installation Guide (M2_2) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (M2_2) supports M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
  • Seite 34 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand.
  • Seite 35 B365 Pro4 Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as NUT2 NUT1 this might damage the module.
  • Seite 36 WDS512G1X0C-00ENX0 (NVME) Kingston PCIe2 x4 SH2280S3/480G Samsung PCIe x4 XP941-512G (MZHPU512HCGL) SanDisk PCIe SD6PP4M-128G SanDisk PCIe SD6PP4M-256G Plextor PCIe PX-G256M6e Plextor PCIe PX-G512M6e For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Seite 37 B365 Pro4 2.10 ASRock Polychrome RGB ASRock RGB LED is a lighting control utility specifically designed for unique individuals with sophisticated tastes to build their own stylish colorful lighting system. Simply by connecting the LED strip, you can customize various lighting schemes and patterns, including Static, Breathing, Strobe, Cycling, Music, Wave and more.
  • Seite 38 Connecting the Addressable RGB LED Strip Connect your Addressable RGB LED strip to the Addressable LED Header (ADDR_LED1) on the motherboard. ADDR_LED1 DO_ADDR VOUT B365 Pr o4 1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be damaged.
  • Seite 39 ASRock Polychrome LED Utility Now you can adjust the RGB LED color through the ASRock Polychrome LED utility. Download this utility from the ASRock Live Update & APP Shop and start coloring your PC style your way! Drag the tab to customize your preference.
  • Seite 40: Einleitung

    1 Einleitung Vielen Dank, dass Sie sich für das B365 Pro4 von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Seite 41: Technische Daten

    B365 Pro4 1.2 Technische Daten • ATX-Formfaktor Plattform • Feststoffkondensator-Design • Unterstützt Intel® Core Prozessor -Prozessoren (Sockel 1151) der 8 & Generation • Unterstützt CPU bis 95 W • Digi Power design • 8-Leistungsphasendesign • Unterstützt Intel® Turbo Boost 2.0-Technologie • Intel®...
  • Seite 42 • Unterstützt integrierte Intel® UHD Graphics-Visualisierung: Intel® Quick Sync Video mit AVC, MVC (S3D) und MPEG- 2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® UHD Graphics • DirectX 12 • HWA encodieren/decodieren: AVC/H.264, HEVC/H.265 8 bit, HEVC/H.265 10 bit, VP8, VP9 8 bit, VP9 10 bit (nur Dekodierung), MPEG2, MJPEG, VC-1 (nur Dekodierung) • Drei Grafikkarten-Ausgangsoptionen: D-Sub, DVI-D und...
  • Seite 43: Anschluss

    2230/2242/2260/2280/22110-M.2-PCI-Express-Modul bis Gen3 x 4 (32 Gb/s)** ** Unterstützt Intel® Optane -Technologie ** Unterstützt NVMe-SSD als Bootplatte ** Unterstützt ASRock U.2-Kit • 1 x COM-Anschluss-Stiftleiste Anschluss • 1 x TPM-Stiftleiste • 1 x Betrieb-LED- und Lautsprecher-Stiftleiste • 2 x RGB-LED-Stiftleisten * Unterstützt insgesamt bis zu 12 V/3 A, 36-W-LED-Streifen...
  • Seite 44: Funktion

    • Spannungsüberwachung: +12 V, +5 V, +3,3 V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10, 64 Bit Betriebssystem • FCC, CE Zertifizierungen • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) * Detaillierte Produktinformationen finden Sie auf unserer Webseite:http://www.asrock.com...
  • Seite 45 B365 Pro4 Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS- Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind. Eine Übertaktung kann sich auf die Stabilität Ihres Systems auswirken und sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Seite 46: Jumpereinstellung

    1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper- Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. CMOS-löschen-Jumper (CLRMOS1) 2-pin Jumper (siehe S. 1, Nr. 17) CLRMOS1 ermöglicht Ihnen die Löschung der Daten im CMOS.
  • Seite 47: Integrierte Stiftleisten Und Anschlüsse

    B365 Pro4 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen. Systemblende-Stiftleiste...
  • Seite 48 Betrieb-LED- und Bitte verbinden Sie die Betrieb- SPEAKER DUMMY Lautsprecher-Stiftleiste LED des Gehäuses und den DUMMY (7-polig, SPK_PLED1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 13) Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese sechs SATA-III-Anschlüsse (SATA3_0: unterstützen SATA-Datenkabel für siehe S. 1, Nr. 12) interne Speichergeräte mit einer (SATA3_1: Datenübertragungsgeschwindigkeit...
  • Seite 49 B365 Pro4 Audiostiftleiste (Frontblende) Diese Stiftleiste dient dem PRESENCE# MIC_RET (9-polig, HD_AUDIO1) Anschließen von Audiogeräten an OUT_RET (siehe S. 1, Nr. 26) der Frontblende. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt.
  • Seite 50 CPU-Lüfteranschluss Dieses Motherboard bietet einen FAN_VOLTAGE CPU_FAN_SPEED (4-polig, CPU_FAN1) 4-poligen CPU-Lüfteranschluss FAN_SPEED_CONTROL (siehe S. 1, Nr. 3) (lautloser Lüfter). Falls Sie einen 3-poligen CPU-Lüfter anschließen möchten, verbinden Sie ihn bitte mit Kontakt 1 bis 3. ATX-Netzanschluss Dieses Motherboard bietet einen (24-polig, ATXPWR1) 24-poligen ATX-Netzanschluss.
  • Seite 51 B365 Pro4 Thunderbolt- Erweiterungskartenanschluss Bitte verbinden Sie eine (5-polig, TB1) Thunderbolt™-Erweiterungskarte (siehe S. 1, Nr. 27) über das GPIO-Kabel mit diesem Thunderbolt-AIC-Anschluss. *Bitte installieren Sie die Thunderbolt™-AIC-Karte am PCIE3 (Standardsteckplatz). RGB-LED-Stiftleisten RGB-Stiftleiste dient dem Anschließen eines RGB-LED- (4-polig, RGB_LED1) Erweiterungskabels, das dem Nutzer 12V G R (siehe S.
  • Seite 52: Contenu De L'emballage

    à modification sans préavis. En cas de modifications du présent document, la version mise à jour sera disponible sur le site Internet ASRock sans notifica- tion préalable. Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez.
  • Seite 53 B365 Pro4 1.2 Spécifications • Facteur de forme ATX Plateforme • Conception à condensateurs solides • Prend en charge les processeurs 8 Processeur et 9 génération Intel® Core (socket 1151) • Prend en charge les unités centrales jusqu’à 95W • Digi Power design • Alimentation à...
  • Seite 54 • Prend en charge la technologie Intel® UHD Graphics Built- in Visuals : Intel® Quick Sync Video avec AVC, MVC (S3D) et MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® UHD Graphics • DirectX 12 • Codage/Décodage HWA : AVC/H.264, HEVC/H.265 8 bits, HEVC/H.265 10 bits, VP8, VP9 8 bits, VP9 10 bits (Encodage...
  • Seite 55 Gen3 x4 (32 Go/s)** ** Prend en charge Intel® Optane Technology ** Prend en charge les SSD NVMe comme disques de démarrage ** Prend en charge le kit ASRock U.2 • 1 x embase pour port COM Connecteur • 1 x embase TPM • 1 x prise DEL d’alimentation et haut-parleur...
  • Seite 56 • Surveillance de la tension d’alimentation : +12V, +5V, +3,3V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64 bits Système d’exploitation • FCC, CE Certifications • ErP/EuP Ready (alimentation ErP/EuP ready requise) * pour des informations détaillées de nos produits, veuillez visiter notre site :http://www.asrock.com...
  • Seite 57 B365 Pro4 Il est important de signaler que l’ o verclocking présente certains risques, incluant des modifications du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’ o utils d’ o verclocking développés par des tiers. La stabilité de votre système peut être affectée par ces pratiques, voire provoquer des dommages aux composants et aux périphériques du système.
  • Seite 58 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court- circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ».
  • Seite 59 B365 Pro4 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Seite 60 Prise DEL d’alimentation et Veuillez brancher la DEL SPEAKER DUMMY haut-parleur d'alimentation du châssis et le DUMMY (SPK_PLED1 à 7 broches) haut-parleur du châssis sur ce (voir p.1, No. 13) connecteur. PLED+ PLED+ PLED- Connecteurs Serial ATA3 Ces six connecteurs SATA3 (SATA3_0: sont compatibles avec les voir p.1, No.
  • Seite 61 B365 Pro4 Embase audio du panneau Cette embase sert au PRESENCE# MIC_RET frontal branchement des appareils OUT_RET (HD_AUDIO1 à 9 broches) audio au panneau audio frontal. (voir p.1, No. 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L’ a udio haute définition prend en charge la technologie Jack Sensing (détection de la fiche), mais le panneau grillagé...
  • Seite 62 Connecteur du ventilateur Cette carte mère est dotée d’un FAN_VOLTAGE CPU_FAN_SPEED connecteur pour ventilateur du processeur FAN_SPEED_CONTROL de processeur (Quiet Fan) à (CPU_FAN1 à 4 broches) 4 broches. Si vous envisagez (voir p.1, No. 3) de connecter un ventilateur de processeur à 3 broches, veuillez le brancher sur la Broche 1-3.
  • Seite 63 B365 Pro4 Connecteur Thunderbolt Veuillez connecter une carte d’ e xtension (AIC) Thunderbolt™ (TB1 à 5 broches) au connecteur AIC Thunderbolt (voir p.1, No. 27) via le câble GPIO. *Veuillez installer la carte Thunderbolt™ AIC sur PCIE3 (emplacement par défaut).
  • Seite 64: Contenuto Della Confezione

    Nel caso di eventuali modifiche della presente documentazione, la versione aggiornata sarà disponibile sul sito Web di ASRock senza ulteriore preavviso. Per il supporto tecnico correlato a questa scheda madre, visitare il nostro sito Web per informazioni specifiche relative al modello at- tualmente in uso.
  • Seite 65 B365 Pro4 1.2 Specifiche • Fattore di forma ATX Piattaforma • Design condensatore solido • Supporta processori 8 Gen e 9 Generation Intel® Core (Socket 1151) • Supporto di CPU fino a 95W • Digi Power design • Potenza a 8 fasi • Supporta la tecnologia Intel®...
  • Seite 66 • Supporta la videografica integrata della scheda video UHD Intel®: Intel® Quick Sync Video con AVC, MVC (S3D) e MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® UHD Graphics • DirectX 12 • Codifica/decodifica HWA: AVC/H.264, HEVC/H.265 8-bit, HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (solo decodifica), MPEG2, MJPEG, VC-1 (solo decodifica)
  • Seite 67 Express di tipo M Key 2230/2242/2260/2280/22110 fino a Gen3 x4 (32 Gb/s)** ** Supporta la tecnologia Intel® Optane ** Supporto di SSD NVMe come disco d’avvio ** Supporta kit ASRock U.2 • 1 x connettore porta COM Connettore • 1 x connettore TPM • 1 x connettore LED alimentazione e altoparlante...
  • Seite 68: Hardware Monitor

    • Monitoraggio tensione: +12V, +5V, +3,3V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64 bit • FCC, CE Certificazioni • ErP/EuP Ready (è necessaria alimentazione ErP/EuP ready) * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web:http://www.asrock.com...
  • Seite 69 B365 Pro4 Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazi- one delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di strumenti di overclocking di terze parti. L'overclocking può influenzare la stabilità del sistema o perfino provocare danni ai componenti e ai dispositivi del sistema.
  • Seite 70 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". Jumper per azzerare la CMOS (CLRMOS1) 2-pin Jumper (vedere pag.
  • Seite 71 B365 Pro4 1.4 Header e connettori su scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre.
  • Seite 72 Connettore LED Collegare i LED alimentazione SPEAKER DUMMY alimentazione e e l’altoparlante a questo con- DUMMY altoparlante nettore. (SPK_PLED1 a 7 pin) (vedere pag. 1, n. 13) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi sei connettori SATA3 (SATA3_0: supportano cavi dati SATA vedere pag.
  • Seite 73 B365 Pro4 Header audio pannello Questo header serve a PRESENCE# MIC_RET anteriore collegare i dispositivi audio al OUT_RET (HD_AUDIO1 a 9 pin) pannello audio anteriore. (vedere pag. 1, n. 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo chassis deve supportare HDA per funzionare correttamente.
  • Seite 74 Connettore ventola CPU Questa scheda madre è dotata FAN_VOLTAGE CPU_FAN_SPEED (CPU_FAN1 a 4 pin) di un connettore per la ventola FAN_SPEED_CONTROL (vedere pag. 1, n. 3) della CPU (Ventola silenziosa) a 4 pin. Se si decide di col- legare una ventola della CPU a 3 pin, collegarla al pin 1-3.
  • Seite 75 B365 Pro4 ConnettoreThunderbolt Collegare una scheda aggiuntiva Thunderbolt™ (AIC) al connettore (TB1 5-pin) Thunderbolt AIC utilizzando il (vedere pag. 1, n. 27) cavo GPIO. *Installare la scheda AIC Thunderbolt™ su PCIE3 (slot predefinito). Collettore LED RGB Il collettore RGB viene utilizzato...
  • Seite 76: Contenido Del Paquete

    Podrá encontrar las últimas tarjetas VGA, así como la lista de compatibilidad de la CPU, en el sitio web de ASRock. Sitio web de ASRock http://www.asrock.com.
  • Seite 77 B365 Pro4 1.2 Especificaciones • Factor de forma ATX Plataforma • Diseño de condensador sólido • Compatible con 8 generación de procesadores Intel® Core (Socket 1151) • Admite CPU de hasta 95 W. • Digi Power design • Diseño de 8 fases de alimentación • Admite la tecnología Intel®...
  • Seite 78 • Admite Intel® UHD Graphics Built-in Visuals: Intel® Quick Sync Video con AVC, MVC (S3D) y MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® UHD Graphics • DirectX 12 • Codificación y descodificación HWA: AVC/H.264, HEVC/H.265 8 bits, HEVC/H.265 10 bits, VP8, VP9 8 bits, VP9 10 bits (solo descodificar), MPEG2, MJPEG, VC-1 (solo descodificar) • Tres opciones de salida de gráficos: D-Sub, DVI-D y HDMI...
  • Seite 79 ** Compatible con la tecnología Optane de Intel® ** Admite unidad de estado sólido de NVMe como disco de arranque ** Admite el kit U.2 de ASRock • 1 x Base de conexiones de puerto COM Conector • 1 x Conector TPM • 1 x LED de alimentación y base de conexiones para el altavoz...
  • Seite 80 VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64 bits • FCC y CE Certifica- • Preparado para ErP/EuP (se necesita una fuente de alimentación ciones preparada para ErP/EuP) * Para obtener información detallada del producto, visite nuestro sitio Web:http://www.asrock.com...
  • Seite 81 B365 Pro4 Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de overclocking, incluido el ajuste de la BIOS, aplicando la tecnología de overclocking liberada o utilizando las herramientas de overclocking de otros fabricantes. El overclocking puede afectar a la estabilidad del sistema e, incluso, dañar los componentes y dispositivos del sistema.
  • Seite 82 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los contactos, el puente queda “Corto”. Si no coloca la tapa de puente en los contactos, el puente queda “Abierto”. Puente de borrado de CMOS (CLRMOS1) 2-pin Jumper...
  • Seite 83 B365 Pro4 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base.
  • Seite 84 LED de alimentación y Conecte el LED de aliment- SPEAKER DUMMY base de conexiones para la ación del chasis y el altavoz del DUMMY altavoz chasis a esta base de conex- (SPK_PLED1 de 7 iones. contactos) PLED+ (consulte la pág. 1, nº 13) PLED+ PLED- Conectores Serie ATA3...
  • Seite 85 B365 Pro4 Cabezal de audio del panel Este cabezal se utiliza para PRESENCE# MIC_RET frontal conectar dispositivos de audio OUT_RET (HD_AUDIO1 de 9 al panel de audio frontal. contactos) OUT2_L (consulte la pág. 1, nº 26) J_SENSE OUT2_R MIC2_R MIC2_L 1.
  • Seite 86 Conector del ventilador de Esta placa base contiene un FAN_VOLTAGE CPU_FAN_SPEED la CPU conector de ventilador (venti- FAN_SPEED_CONTROL (CPU_FAN1 de 4 lador silencioso) de CPU de 4 contactos) contactos. Si tiene pensando (consulte la pág. 1, nº 3) conectar un ventilador de CPU de 3 contactos, conéctelo al contacto 1-3.
  • Seite 87 B365 Pro4 Conector Thunderbolt Enchufe una tarjeta complementaria (AIC) (TB1 de 5 contactos) Thunderbolt™ al conector (consulte la pág. 1, nº 27) Thunderbolt AIC a través del cable GPIO. *Instale la tarjeta Thunderbolt™ AIC a PCIE3 (ranura predeterminada). Cabezales de LED RGB...
  • Seite 88: Комплект Поставки

    BIOS содержимое настоящей документации может быть изменено без предварительного уведомления. При изменении содержимого настоящего документа его обновленная версия будет доступна на веб-сайте ASRock без предварительного уведомления. При необходимости технической поддержки, связанной с материнской платой, посетите веб-сайт и найдите на нем информацию о модели используемой вами материнской...
  • Seite 89: Технические Характеристики

    B365 Pro4 1.2 Технические характеристики • Форм-фактор ATX Платформа • Схема на основе твердотельных конденсаторов • Поддержка процессоров 8 го го ЦП и 9 поколения Intel® Core (Socket 1151) • Поддерживаются ЦП мощностью до 95 Вт. • Digi Power design • Система питания 8 • Поддерживается...
  • Seite 90 • Поддерживаемые встроенные технологии визуализации Intel® UHD Graphics: Intel® Quick Sync Video с полностью аппаратным кодированием1 в форматах AVC, MVC (S3D) и MPEG-2, Intel® InTru 3D, технология Intel® Clear Video HD, Intel® Insider , Intel® UHD Graphics • DirectX 12 • Программно-аппаратное...
  • Seite 91 Express типа 2230/2242/2260/2280/22110 с ключом M до версии Gen3 x4 (32 Гбит/с)** ** Поддерживается технология Intel® Optane ** Поддерживаются в качестве загрузочных SSD-диски типа NVMe ** Поддерживается комплект ASRock U.2. • 1 колодка СОМ-порта Разъемы • 1 колодка ТРМ • 1 колодка светодиодного индикатора питания и...
  • Seite 92 • Контроль напряжений: +12 В, +5 В, +3,3 В, напряжение ядра ЦП, DRAM, VPPM, PCH 1,0B, VCCSA, VCCST • Microsoft® Windows® 10 (64-разрядная) Операционные системы • FCC, CE Сертификация • Совместимость с ErP/EuP (необходим блок питания, соответствующий стандарту ErP/EuP) * С дополнительной информацией об изделии можно ознакомиться на веб-сайте:http://www.asrock.com...
  • Seite 93 B365 Pro4 Следует учитывать, что разгон процессора, включая изменение настроек BIOS, применение технологии Untied Overclocking и использование инструментов разгона независимых производителей, сопряжен с определенным риском. Разгон процессора может снизить стабильность системы или даже привести к повреждению ее компонентов и устройств. Разгон процессора осуществляется пользователем на...
  • Seite 94 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке перемычки-колпачка на контакты перемычка «замкнута». Если перемычка-колпачок на контакты не установлена, перемычка «разомкнута». Перемычка сброса настроек CMOS 2-pin Jumper (CLRMOS1) (см. стр. 1, № 17) CLRMOS1 используется для удаления данных CMOS. Чтобы сбросить и обнулить параметры...
  • Seite 95 B365 Pro4 1.4 Колодки и разъемы, расположенные на системной плате Расположенные на системной плате колодки и разъемы НЕ являются перемычками. НЕ устанавливайте на эти колодки и разъемы перемычки-колпачки. Установка перемычек-колпачков на эти колодки и разъемы может вызвать неустранимое повреждение системной платы.
  • Seite 96 Колодка светодиодного Предназначена для SPEAKER DUMMY индикатора питания и подключения светодиодного DUMMY динамика корпуса индикатора питания и (7-контактная, SPK_ динамика корпуса. PLED1) PLED+ (см. стр. 1, № 13) PLED+ PLED- Разъемы Serial ATA3 Эти шесть разъемов (SATA3_0: SATA3 предназначены для см.
  • Seite 97 B365 Pro4 Аудиоколодка передней Эта колодка предназначена PRESENCE# панели для подключения MIC_RET OUT_RET (9-контактов, аудиоустройств к передней HD_AUDIO1) аудиопанели. (см. стр. 1, № 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но для е правильной работы необходимо, чтобы провод панели корпуса поддерживал...
  • Seite 98 Разъем вентилятора Эта материнская плата FAN_VOLTAGE охлаждения процессора CPU_FAN_SPEED снабжена 4-контактным FAN_SPEED_CONTROL (4-контакта, CPU_FAN1) разъемом для (см. стр. 1, № 3) малошумящего вентилятора ЦП. Если вы собираетесь подключить 3-контактный вентилятор охлаждения процессора, подключайте его к контактам 1-3. Разъем питания АТХ Эта материнская плата (24-контакта, ATXPWR1) оснащена...
  • Seite 99 B365 Pro4 Разъем Thunderbolt AIC Подключите плату расширения (5 контактов, TB1) (AIC) Thunderbolt™ к разъему (см. стр. 1, № 27) Thunderbolt AIC с помощью интерфейсного GPIO-кабеля. *Установите расширительную плату Thunderbolt™ в слот PCIE3 (слот по умолчанию). Колодки для Колодка RGB-подсветки...
  • Seite 100: Conteúdo Da Embalagem

    1 Introdução Obrigado por adquirir a placa mãe ASRock B365 Pro4, uma confiável placa mãe ASRock produzida sob rigoroso controle de qualidade consistente. Esta placa principal oferece um excelente desempenho com um design robusto em conformidade com o compromisso da ASRock em fabricar produtos de qualidade e resistentes.
  • Seite 101: Especificações

    B365 Pro4 1.2 Especificações • Formato ATX Plataforma • Design de condensador sólido • Suporta 8 ª ª Ger. e 9 Geraão de Processadores Intel® Core (Soquete 1151) • Suporta CPU até 95W • Digi Power design • Design com 8 fases de alimentação • Suporta a tecnologia Intel®...
  • Seite 102 • Suporta gráficos incorporados Intel® UHD: Intel® Quick Sync Video com AVC, MVC (S3D) e MPEG-2 Full HW Encode1, Intel® InTru 3D, Tecnologia Intel® Clear Video HD, Intel® Insider , Gráficos Intel® UHD • DirectX 12 • HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit, HEVC/ H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decodificar apenas), MPEG2, MJPEG, VC-1 (Decodificar apenas) • Três opções de saída de gráficos: D-Sub, DVI-D e HDMI...
  • Seite 103 2230/2242/2260/2280/22110 módulo M.2 PCI Express até Gen3 x4 (32 Gb/s)** ** Suporta a tecnologia Intel® Optane ** Suporta NVMe SSD como discos de inicialização ** Suporta Kit ASRock U.2 • 1 x Suporte porta COM Conector • 1 x Plataforma TPM • 1 x LED de alimentação e Cabeçote de Autofalante...
  • Seite 104 DRAM, VPPM, PCH 1.0V, VCCSA, VCCST • Microsoft® Windows® 10 64-bit • FCC, CE Certificações • Preparada para ErP/EuP (é necessária uma fonte de alimentação preparada para ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site:http://www.asrock.com...
  • Seite 105 B365 Pro4 Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramen- tas de overclocking de terceiros. O overclocking poderá afetar a estabilidade do sistema ou mesmo causar danos nos componentes e dispositivos do seu sistema.
  • Seite 106 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto". Apagar o Jumper CMOS (CLRMOS1) 2-pin Jumper...
  • Seite 107 B365 Pro4 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe.
  • Seite 108 LED de alimentação e Conecte o LED de alimen- SPEAKER DUMMY Cabeçote de Autofalante tação do chassi e o autofalante DUMMY (SPK_PLED1 de 7 pinos) do chassi a este cabeçote. (ver p.1, N.º 13) PLED+ PLED+ PLED- Conectores série ATA3 Estes seis conectores SATA3 (SATA3_0: suportam cabos de dados...
  • Seite 109 B365 Pro4 Suporte de áudio do painel Este suporte destina-se à PRESENCE# frontal conexão dos dispositivos MIC_RET OUT_RET (HD_AUDIO1 de 9 pinos) de áudio no painel de áudio (ver p.1, N.º 26) frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. O Áudio de alta definição suporta Sensor de Adaptador, mas o fio do painel no chassi deverá...
  • Seite 110 Conector da Ventoinha da Esta placa mãe inclui um FAN_VOLTAGE CPU_FAN_SPEED conector de ventilador da CPU FAN_SPEED_CONTROL (CPU_FAN1 de 4 pinos) (Ventilador silencioso) de 4 pi- (ver p.1, N.º 3) nos. Se você pretende conectar um ventilador da CPU de 3 pinos, por favor, conecte-o ao Pino 1-3.
  • Seite 111 B365 Pro4 Conector Thunderbolt Por favor, conecte uma placa adicional Thunderbolt™ (AIC) a (TB1 de 5 pinos) este conector Thunderbolt AIC (ver p.1, N.º 27) através do cabo GPIO. * Por favor, instale o cartão Thunderbolt ™ AIC para PCIE3 (slot padrão).
  • Seite 112: Zawartość Opakowania

    1 Wprowadzenie Dziękujemy za zakupienie płyty głównej ASRock B365 Pro4, niezawodnej płyty głównej produkowanej z konsekwentnie wykonywaną przez firmę ASRock, rygorystyczną kontrolą jakości. Płyta ta zapewnia doskonałą jakość działania i solidną konstrukcję, spełniającą zobowiązanie firmy ASRock do dostarczania produktów o wysokiej jakości i wytrzymałości.
  • Seite 113 B365 Pro4 1.2 Specyfikacje • Współczynnik kształtu ATX Platforma • Konstrukcja kondensatorami stałymi • Obsługa 8 generacji procesorów Intel® Core (Socket 1151) • Obsługa CPU do 95W • Digi Power design • Sekcja zasilania 8 Power Phase Design • Obsługa technologii Intel® Turbo Boost 2.0 • Intel®...
  • Seite 114 • Obsługa wbudowanej grafiki Intel® UHD: Intel® Quick Sync Video z AVC, MVC (S3D) i MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider grafika Intel® UHD • DirectX 12 • Kodowanie/dekodowanie HWA: AVC/H.264, HEVC/H.265 8-bit, HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (tylko dekodowanie), MPEG2, MJPEG, VC-1 (tylko dekodowanie) • Opcje trzech wyjść...
  • Seite 115 2230/2242/2260/2280/22110 modułu M.2 PCI Express do Gen3 x4 (32 Gb/s)** ** Obsługa technologii Intel® Optane ** Obsługa SSD NVMe, jako dysków rozruchowych ** Obsługa ASRock U.2 Kit • 1 x złącze główkowe portu COM Złącze • 1 x złącze główkowe TPM • 1 x dioda LED zasilania i złącze główkowe głośnika...
  • Seite 116 • Monitorowanie napięcia: +12V, +5V, +3,3V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64-bitowy System operacyjny • FCC, CE Certyfikaty • Gotowość do obsługi ErP/EuP (Wymagane zasilanie z gotowością obsługi ErP/EuP) * Dla uzyskania szczegółowej informacji o produkcie, należy odwiedzić naszą stronę internetową:http://www.asrock.com...
  • Seite 117 B365 Pro4 Należy pamiętać, że przetaktowywanie jest związane z pewnym ryzykiem, włącznie z regulacją ustawień w BIOS, zastosowaniem Untied Overclocking Technology lub używaniem narzędzi przetaktowywania innych firm. Przetaktowywanie może wpływać na stabilność systemu lub nawet powodować uszkodzenie komponentów i urządzeń systemu. Powinno to zostać zrobione na własne ryzyko i koszt.
  • Seite 118 1.3 Ustawienia zworek Ta ilustracja pokazuje ustawienia zworek. Po umieszczeniu nasadki zworki na pinach, zworka jest “Zwarta”. Jeśli nasadka zworki nie jest umieszczona na pinach, zworka jest “Otwarta”. Zworka usuwania danych z pamięci CMOS 2-pin Jumper (CLRMOS1) (sprawdź s.1, Nr 17) CLRMOS1 umożliwia usunięcie wszystkich danych z pamięci CMOS.
  • Seite 119 B365 Pro4 1.4 Wbudowane złącza główkowe i inne złącza Wbudowane złącza główkowe i inne złącza są bezzworkowe. NIE należy umieszczać zworek nad tymi złączami główkowymi i złączami. Umieszczanie zworek nad złączami główkowymi i złączami spowoduje trwałe uszkodzenie płyty głównej. Złącze główkowe na panelu Do tego złącza główkowego...
  • Seite 120 Dioda LED zasilania i złącze Podłącz to tego złącza SPEAKER DUMMY główkowe głośnika główkowego diodę LED DUMMY (7-pinowe SPK_PLED1) zasilania obudowy i głośnik (sprawdź s.1, Nr 13) obudowy. PLED+ PLED+ PLED- Złącza Serial ATA3 Te sześć złączy SATA3 (SATA3_0: obsługuje kable danych SATA sprawdź...
  • Seite 121 B365 Pro4 Złącze główkowe audio panelu To złącze główkowe służy do PRESENCE# MIC_RET przedniego podłączania urządzeń audio OUT_RET (9-pinowe HD_AUDIO1) do przedniego panelu audio. (sprawdź s.1, Nr 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio obsługuje wykrywanie gniazda, ale aby działać prawidłowo prze- wód panelu na obudowie musi obsługiwać...
  • Seite 122 Złącze wentylatora CPU Ta płyta główna udostępnia FAN_VOLTAGE CPU_FAN_SPEED (4-pinowe CPU_FAN1) 4-pinowe złącze wentylatora FAN_SPEED_CONTROL (sprawdź s.1, Nr 3) CPU (Cichy wentylator). Jeśli planowane jest podłączenie 3-pinowego wentylatora CPU, należy je podłączyć do pinów 1-3. Złącze zasilania ATX Ta płyta główna udostępnia (24-pinowe ATXPWR1) 24-pinowe złącze zasi- (sprawdź...
  • Seite 123 B365 Pro4 Złącze Thunderbolt AIC Podłącz dodatkową kartę (5-pinowe TB1) Thunderbolt™ (AIC) do złącza (sprawdź s.1, Nr 27) Thunderbolt AIC przez kabel GPIO. * Należy zainstalować kartę Thunderbolt™ AIC do PCIE3 (gniazdo domyślne). Złącza główkowe LED RGB Złącze główkowe RGB jest (4-pinowe RGB_LED1) używane do podłączenia...
  • Seite 124 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 문서의 내용은 예고 없이 변경될 수 있습니다 . 이 설명서가 변경될 경우 , 업데이트된 버 전은 ASRock 의 웹사이트에서 추가 통지 없이 제공됩니다 . 이 마더보드와 관련 하여 기술적 지원이 필요한 경우 , 당사의 웹사이트를 방문하여 사용 중인 모델...
  • Seite 125 B365 Pro4 1.2 규격 • ATX 폼 팩터 플랫폼 • 솔리드 콘덴서 구조 • 8 세대 및 9 세대 Intel® Core 프로세서 지원 ( 소켓 1151) • 최대 95W 의 CPU 지원 • Digi Power design • 8 개 전원 위상 구조...
  • Seite 126 • Intel® UHD 그래픽스 빌트 - 인 비주얼 지원 : AVC, MVC (S3D) 및 MPEG-2 풀 HW Encode1 지원 Intel® Quick Sync 3D, Intel® 클리어 비디오 HD 기술 , Intel® Video, Intel® InTru , Intel® UHD 그래픽스 Insider • DirectX 12 •...
  • Seite 127 (32 Gb/s)** 기술 지원 ** Intel® Optane ** NVMe SSD 를 부팅 디스크로 사용 가능하도록 지원 ** ASRock U.2 키트 지원 • COM 포트 헤더 1 개 커넥터 • TPM 헤더 1 개 • 전원 LED 및 스피커 헤더 1 개...
  • Seite 128 인증 • ErP/EuP 사용 가능 (ErP/EuP 사용 가능 전원공급장치 필요 ) * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 :http://www.asrock.com BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체의 오버 클로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위험이 따른다는...
  • Seite 129 B365 Pro4 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . Clear CMOS 점퍼 (CLRMOS1) (1 페이지 , 17 번 항목 참조 ) 2-pin Jumper CLRMOS1 을...
  • Seite 130 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마 십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩니다 . 시스템 패널 헤더 섀시의 전원 버튼 , 리셋 버튼 , PLED+ PLED- (9 핀...
  • Seite 131 B365 Pro4 전원 LED 및 스피커 헤더 섀시 전원 LED 와 섀시 스피 SPEAKER DUMMY (7 핀 SPK_PLED1) 커를 이 헤더에 연결하십시 DUMMY (1 페이지 , 13 번 항목 참조 ) 오 . PLED+ PLED+ PLED- 시리얼 ATA3 커넥터 이들 6 개의 SATA3 커넥터는...
  • Seite 132 전면 패널 오디오 헤더 이 헤더는 오디오 장치를 전 PRESENCE# MIC_RET (9 핀 HD_AUDIO1) 면 오디오 패널에 연결하는 OUT_RET (1 페이지 , 26 번 항목 참조 ) 데 사용됩니다 . OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와이어 가...
  • Seite 133 B365 Pro4 CPU 팬 커넥터 이 마더보드에는 4 핀 CPU FAN_VOLTAGE CPU_FAN_SPEED (4 핀 CPU_FAN1) 팬 ( 저소음 팬 ) 커넥터가 탑 FAN_SPEED_CONTROL (1 페이지 , 3 번 항목 참조 ) 재되어 있습니다 . 3 핀 CPU 팬을 연결하려는 경우 핀 1-3 에...
  • Seite 134 Thunderbolt AIC 커넥터 Thunderbolt ™ 확장 카드 (AIC) (5 핀 TB1) 를 GPIO 케이블로 Thunderbolt (1 페이지 , 27 번 항목 참조 ) AIC 커넥터에 연결하십시오 . *Thunderbolt ™ AIC 카드를 PCIE3( 기본 슬롯 ) 에 설치하십 시오 . RGB LED 헤더 RGB 헤더는...
  • Seite 135 アルの内容は予告なしに変更するこ とがあります。 このマニュアルの内容に変更が あった場合には、 更新されたバージョンは、 予告なくASRock のウェブサイ トから 入手できるようになります。 このマザーボードに関する技術的なサポートが必要な 場合には、 ご使用のモデルについての詳細情報を、 当社のウェブサイ トで参照く だ さい。 ASRock のウェブサイ トでは、 最新の VGA カードおよび CPU サポート一覧も ご覧になれます。 ASRock ウェブサイ ト http://www.asrock.com. 1.1 パッケージの内容 • ASRock B365 Pro4 マザーボード (ATX フォームファクター) • ASRock B365 Pro4 クイックインストールガイ ド...
  • Seite 136 1.2 仕様 • ATX フォームファクタ プラッ ト • 固体コンデンサ設計 フォーム • 第 8 世代と第 9 世代 Intel® Core プロセッサーに対応 (ソケ ッ ト 1151) • 最大 95W までの CPU に対応 • デジタル電源設計 • 8 電源フェーズ設計 • Intel® ターボブースト 2.0 テク ノロジーをサポート チップセッ...
  • Seite 137 B365 Pro4 • Intel® UHD グラフィ ックス内蔵ビジュアルをサポート : AVC、 MVC (S3D) および MPEG-2 Full HW Encode1 が装備された Intel® クイック ・ シンク ・ ビデオ、 Intel® InTru 3D、 Intel® ク リアー ・ ビデオ HD テク ノロジー、 Intel® Insider 、 Intel® UHD グラフ...
  • Seite 138 M Key タイプ 2230/2242/2260/2280/22110 M.2 PCI Express モ ジュールに対応 ** テク ノロジーに対応 ** Intel® Optane ** 起動ディスクとして NVMe SSD に対応 ** ASRock U.2 キッ トに対応 • 1 x COM ポートヘッダー コネクタ • 1 x TPM ヘッダー • 1 x 電源 LED とスピーカーヘッダー...
  • Seite 139 • ファンマルチ速度制御 : CPU、 CPU/ ウォーターポンプ、 シャ ーシ / ウォーターポンプファン • 電圧監視 : +12V、 +5V、 +3.3V、 CPU Vcore、 DRAM、 VPPM、 PCH 1.0V、 VCCSA、 VCCST • Microsoft® Windows® 10 64-bit 認証 • FCC、 CE • ErP/EuP Ready ( ErP/EuP 対応電源供給装置が必要です) * 商品詳細については、 当社ウェブサイ トをご覧く ださい。 http://www.asrock.com...
  • Seite 140 BIOS 設定の調整、 アンタイ ドオーバークロックテク ノロジーの適用、 サードパーティのオー バークロックツールの使用などを含む、 オーバークロックには、 一定のリスクを伴いますの でご注意く ださい。 オーバークロックするとシステムが不安定になったり、 システムのコン ポーネントやデバイスが破損するこ とがあります。 ご自分の責任で行ってく ださい。 弊社で は、 オーバークロックによる破損の責任は負いかねますのでご了承く ださい。...
  • Seite 141 B365 Pro4 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピン に被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被さっ ていない場合には、 ジャンパーは 「オープン」 です。 CMOS ク リアジャンパー (CLRMOS1) (p.1、 No. 17 参照) 2-pin Jumper CLRMOS1 を使って CMOS 内のデータをクリアできます。 クリアして、 デフォルト設 定にシステムパラメーターをリセッ トするには、 コンピューターの電源を切り、 電源 から電源コードを抜いてく ださい。 15 秒間待ってから、 ジャンパーキャップを使用し...
  • Seite 142 1.4 オンボードのヘッダーとコネクタ オンボードヘッダーとコネクタはジャンパーではありません。 これらヘッダーとコネクタに はジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクタにジャンパーキャッ プを被せると、 マザーボードに物理損傷が起こるこ とがあります。 システムパネルヘッダー 電源ボタンを接続し、 ボタン PLED+ PLED- (9 ピン PANEL1) をリセッ トし、 下記のピン割り PWRBTN# (p.1、 No. 16 参照) 当てに従って、 シャーシのシス テムステータス表示ランプを このヘッダーにセッ トします。 RESET# HDLED- ケーブルを接続するときには、 HDLED+ ピンの+と−に気をつけてく ださい。 PWRBTN (電源ボタン) : シャーシ前面パネルの電源ボタンに接続してく...
  • Seite 143 B365 Pro4 電源 LED とスピーカーヘ シャーシ電源 LED とシャー SPEAKER ッダー シスピーカーをこのヘッダー DUMMY DUMMY (7 ピン SPK_PLED1) に接続してく ださい。 (p.1、 No. 13 参照) PLED+ PLED+ PLED- シリアル ATA3 コネクタ これら 6 つの SATA3 コネク ターは、 最高 6.0 Gb/ 秒の (SATA3_0: p.1、 No. 12 参照)...
  • Seite 144 フロントパネルオーディ このヘッダーは、 フロントオー PRESENCE# MIC_RET オヘッダー ディオパネルにオーディオデ OUT_RET (9 ピン HD_AUDIO1) バイスを接続するためのも (p.1、 No. 26 参照) のです。 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. ハイディフィニションオーディオはジャックセンシングをサポートしていますが、 正し く機能するためには、 シャーシのパネルワイヤーが HDA をサポートしているこ とが 必要です。 お使いのシステムを取り付けるには、 当社のマニュアルおよびシャーシの マニュアルの指示に従ってく ださい。 2. AC 97 オーディオパネルを使用する場合には、 次のステップで、 前面パネルオーディ オヘッダーに取り付けてく...
  • Seite 145 B365 Pro4 CPU ファンコネクタ このマザーボードは 4 ピン FAN_VOLTAGE CPU_FAN_SPEED (4 ピン CPU_FAN1) CPU ファン (静音ファン) コネ FAN_SPEED_CONTROL (p.1、 No. 3 参照) クタが装備されています。 3 ピ ンの CPU ファンを接続する 場合には、 ピン 1-3 に接続し てく ださい。 ATX 電源コネクタ このマザーボードは 24 ピン (24 ピン ATXPWR1)...
  • Seite 146 Thunderbolt AIC コネクタ GPIO ケーブルを使って、 (5 ピン TB1) Thunderbolt ™ ア ドインカード (p.1、 No. 27 参照) (AIC) を Thunderbolt AIC コネ クターに接続してく ださい。 *PCIE3 ( デフォルトスロッ ト) に Thunderbolt ™ AIC カードを取り 付けてく ださい。 RGB LED ヘッダー RGB ヘッダーは RGB LED 延長 (4 ピン...
  • Seite 147 恕不另行通知。如果本文档有任何修改,则更新的版本将发布在华擎网站上, 我们不会另外进行通知。如果您需要与此主板相关的技术支持,请访问我们的 网站以具体了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 B365 Pro4 主板(ATX 规格尺寸) • 华擎 B365 Pro4 快速安装指南 • 华擎 B365 Pro4 支持光盘 • 2 x 串行 ATA (SATA) 数据线(选配) • 1 x I/O 面板 • 3 x 螺丝(供 M.2 插座使用)(选配)...
  • Seite 148 1.2 规格 平台 • ATX 规格尺寸 • 稳固的电容器设计 • 支持第 8 代和第 9 代 Intel® Core 处理器(插座 1151) • 支持最高 95W 的 CPU • Digi Power design • 8 电源相设计 • 支持 Intel® Turbo Boost 2.0 技术 芯片集 • Intel® B365 内存...
  • Seite 149 B365 Pro4 • 支持 Intel® UHD Graphics 内置视效 : Intel® 快速同步视频, 采用 AVC、MVC (S3D) 和 MPEG-2 Full HW Encode1、Intel® 3D、Intel® Clear Video HD 技术、Intel® Insider 、 InTru Intel® UHD Graphics • DirectX 12 • HWA 编码 / 解码 : AVC/H.264、HEVC/H.265 8-bit、HEVC/ H.265 10-bit、VP8、VP9 8-bit、VP9 10-bit ( 仅解码...
  • Seite 150 后面板 I/O • 1 x PS/2 鼠标 / 键盘端口 • 1 x D-Sub 端口 • 1 x DVI-D 端口 • 1 x HDMI 端口 • 2 x USB 2.0 端口 ( 支持 ESD 保护 ) • 1 x USB 3.1 Gen1 C 类型端口 ( 支持 ESD 保护 ) •...
  • Seite 151 B365 Pro4 • 3 x 机箱 / 水泵风扇接口(4 针)(智能风扇速度控制) * 机箱 / 水泵风扇支持最高 2A (24W) 功率的水冷风扇。 * CPU_FAN2/WP、CHA_FAN1/WP、CHA_FAN2/WP 和 CHA_ FAN3/WP 可以自动检测 3 针脚或 4 针脚风扇是否在使用。 • 1 x 24 针 ATX 电源接口 • 1 x 8 针 12V 电源接口...
  • Seite 152 1.3 跳线设置 此图显示如何设置跳线。将跳线帽装到这些针脚上时,跳线 “短接”。如果这 些针脚上没有装跳线帽,跳线 “开路”。 清除 CMOS 跳线 (CLRMOS1) (见第 1 页,第 17 个) 2-pin Jumper CLRMOS1 允许您清除 CMOS 中的数据。要清除和重置系统参数到默认设 置,请关闭计算机,从电源上拔下电源线插头。等候 15 秒后,使用跳线帽将 CLRMOS1 上的针脚短接 5 秒。但是,请勿在更新 BIOS 后立即清除 CMOS。如 果您需要在刚完成 BIOS 更新后清除 CMOS,则必须先启动系统,并在关闭后再 执行清除 CMOS 操作。请注意,密码、日期、时间和用户默认配置文件只在卸 下 CMOS 电池后才会被清除。请记住在清除 CMOS 后取下跳线帽。...
  • Seite 153 B365 Pro4 1.4 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。将跳线帽装到这些 接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配,将机 PLED+ PLED- (9 针 PANEL1) 箱上的电源按钮、重置按钮 PWRBTN# (见第 1 页, 第 16 个) 和系统状态指示灯连接到此 接脚。在连接线缆前请记下 RESET# 正负针脚。 HDLED- HDLED+ PWRBTN(电源按钮): 连接到机箱前面板上的电源按钮。您可以配置使用电源按钮关闭系统的方式。 RESET(重置按钮): 连接到机箱前面板上的重置按钮。如果计算机死机,无法执行正常重新启动,按重 置按钮重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系统处在 S1/S3 睡眠状态时, 此 LED 闪烁。 系统处在 S4 睡眠状态或关机 (S5) 时, 此 LED 熄灭。...
  • Seite 154 电源 LED 和扬声器接脚 请将机箱电源 LED 和机箱 SPEAKER DUMMY (7 针 SPK_PLED1) 扬声器连接到此接脚。 DUMMY (见第 1 页,第 13 个) PLED+ PLED+ PLED- 串行 ATA3 接口 这六个 SATA3 接口支持最 高 6.0 Gb/s 数据传输速率的 (SATA3_0: 见第 1 页, 第 12 个) 内部存储设备的 SATA 数据 线。...
  • Seite 155 B365 Pro4 前面板音频接脚 此接脚用于将音频设备连 PRESENCE# MIC_RET (9 针 HD_AUDIO1) 接到前音频面板。 OUT_RET (见第 1 页,第 26 个) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。请 按照我们的手册和机箱手册的说明安装系统。 2. 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚: A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。...
  • Seite 156 CPU 风扇接口 此主板提供 4 针 CPU 风扇 FAN_VOLTAGE CPU_FAN_SPEED (4 针 CPU_FAN1) (静音风扇)接口。如果您 FAN_SPEED_CONTROL (见第 1 页, 第 3 个) 打算连接 3 针 CPU 风扇, 请将它连接到针脚 1-3。 ATX 电源接口 此主板提供 24 针 ATX 电源 (24 针 ATXPWR1) 接口。要使用 20 针 ATX 电 (见第...
  • Seite 157 B365 Pro4 Thunderbolt AIC 接口 请利用 GPIO 线将 (5- 针 TB1) Thunderbolt ™扩展卡 (AIC) 连 (见第 1 页,第 27 个) 接到 Thunderbolt AIC 接口。 * 请将 Thunderbolt ™ AIC 卡安 装到 PCIE3(默认插槽)。 RGB LED 接脚 RGB 接脚用于连接 RGB LED (4 针 RGB_LED1) 延长线,可让用户选择不同...
  • Seite 158 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准 规定的限量要求,然该部件仍符合欧盟指令...
  • Seite 159 行通知。如本文件有任何修改,可至華擎網站逕行取得更新版本,不另外通知。 若您需要與本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的 特定資訊。您也可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。 華擎網站 http://www.asrock.com. 1.1 包裝內容 • 華擎 B365 Pro4 主機板(ATX 尺寸) • 華擎 B365 Pro4 快速安裝指南 • 華擎 B365 Pro4 支援光碟 • 2 x Serial ATA (SATA) 資料纜線(選用) • 1 x I/O 面板外罩 • 3 x 螺絲(適用於 M.2 插座)(選用)...
  • Seite 160 1.2 規格 • ATX 尺寸 平台 • 固態電容設計 • 支援第 9 代及第 8 代 Intel® Core 處理器 (Socket 1151) • 支援最高 95W CPU • Digi Power design • 8 電源相位設計 • 支援 Intel® Turbo Boost 2.0 技術 • Intel® B365 晶片組...
  • Seite 161 B365 Pro4 • 支援 Intel® UHD Graphics Built-in Visuals:轉換 AVC、 MVC (S3D) 及 MPEG-2 Full HW Encode1 的 Intel® 高速影 像同步轉檔技術、Intel® InTru 3D, Intel® Clear Video HD 、Intel® UHD Graphics Technology、Intel® Insider • DirectX 12 • HWA 編碼 / 解碼:AVC/H.264、HEVC/H.265 8 位元、...
  • Seite 162 • 1 x PS/2 滑鼠/鍵盤連接埠 後面板 I/O • 1 x D-Sub 連接埠 • 1 x DVI-D 連接埠 • 1 x HDMI 連接埠 • 2 x USB 2.0 連接埠(支援靜電保護) • 1 x USB 3.1 Gen1 C 類型連接埠 (支援靜電保護) • 5 x USB 3.1 Gen1 連接埠(支援靜電保護) •...
  • Seite 163 B365 Pro4 • 3 x 機殼/水冷幫浦風扇接頭 (4-pin)(智慧型風扇速度控制) * 機殼/水冷幫浦風扇接頭支援最高 2A (24W) 風扇功率的水冷 風扇。 * 如果 3-pin 或 4-pin 風扇使用中,可自動偵測 CPU_FAN2/WP 、CHA_FAN1/WP、CHA_FAN2/WP 和 CHA_FAN3/WP。 • 1 x 24 pin ATX 電源接頭 • 1 x 8 pin 12V 電源接頭 • 1 x 前面板音訊接頭...
  • Seite 164 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時,該跳線為「短路」。若沒 有跳線帽套在針腳上,該跳線為「開啟」。 清除 CMOS 跳線 (CLRMOS1) (請參閱第 1 頁,編號 17) 2-pin Jumper 您可利用 CLRMOS1 清除 CMOS 中的資料。若要清除及重設系統參數為預設設 定,請先關閉電腦電源,再拔下電源供應器的電源線。在等待 15 秒後,請使用 跳線帽讓 CLRMOS1 上的 pin 短路約 5 秒。不過,請不要在更新 BIOS 後立即清 除 CMOS。若您需在更新 BIOS 後立即清除 CMOS,則必須先重新啟動系統,然 後於進行清除 CMOS 動作前關機。請注意,只有在取出 CMOS 電池時才會清除 密碼、日期、時間及使用者預設設定檔。請牢記,務必在清除...
  • Seite 165 B365 Pro4 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽套在排 針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排列將機 PLED+ PLED- 殼上的電源按鈕、重設按鈕 (9-pin PANEL1) PWRBTN# (請參閱第 1 頁, 編號 16) 及系統狀態指示燈連接至此 排針。在連接纜線之前請注 RESET# 意正負針腳。 HDLED- HDLED+ PWRBTN ( 電源按鈕 ): 連接至機殼前面板上的電源按鈕。您可設定使用電源按鈕關閉系統電源的方式。 RESET ( 重設按鈕 ): 接至機殼前面板上的重設按鈕。若電腦凍結且無法執行正常重新啟動,按下重設按 鈕即可重新啟動電腦。 PLED ( 系統電源 LED):...
  • Seite 166 電源 LED 及喇叭排針 請將機殼電源 LED 及機殼 SPEAKER DUMMY 喇叭連接至此排針。 (7-pin SPK_PLED1) DUMMY (請參閱第 1 頁,編號 13) PLED+ PLED+ PLED- Serial ATA3 接頭 這六組 SATA3 接頭皆支援內 部儲存裝置的 SATA 資料纜 (SATA3_0: 請參閱第 1 頁,編號 12) 線,最高可達 6.0 Gb/s 資料 傳輸率。 (SATA3_1: 請參閱第 1 頁,編號 11) * 若...
  • Seite 167 B365 Pro4 前面板音訊排針 本排針適用於連接音訊裝置 PRESENCE# MIC_RET 至前面板音訊。 (9-pin HD_AUDIO1) OUT_RET (請參閱第 1 頁,編號 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必須支 援 HDA 才能正確運作。請依本手冊及機殼手冊說明安裝系統。 2. 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針: A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。...
  • Seite 168 CPU 風扇接頭 本主機板配備 4-Pin CPU 風 FAN_VOLTAGE CPU_FAN_SPEED 扇 ( 靜音風扇 ) 接頭。若您 (4-pin CPU_FAN1) FAN_SPEED_CONTROL (請參閱第 1 頁, 編號 3) 計畫連接 3-Pin CPU 風扇, 請接至 Pin 1-3。 ATX 電源接頭 本主機板配備一組 24-pin ATX 電源接頭。若要使用 (24-pin ATXPWR1) (請參閱第 1 頁,編號 7) 20-pin ATX 電源供應器,請...
  • Seite 169 B365 Pro4 Thunderbolt AIC 接頭 請透過 GPIO 纜線將 Thunderbolt ™ 附加介面卡 (AIC) (5-pin TB1) (請參閱第 1 頁,編號 27) 接至 Thunderbolt AIC 接頭。 * 請將 Thunderbolt ™ AIC 卡安 裝於 PCIE3 ( 預設插槽 )。 RGB LED 排針 RGB 排針用於連接 RGB LED 延長線,可供使用者選擇各種...
  • Seite 170 Spesifikasi • Bentuk dan Ukuran ATX Platform • Desain Kapasitor Solid • Mendukung Prosesor Generasi ke-8 & Generasi ke-9 Intel® Core (Socket 1151) • Mendukung CPU hingga 95W • Desain Digi Power • Desain 8 Fase Daya • Mendukung Teknologi Intel® Turbo Boost 2.0 • Intel®...
  • Seite 171 B365 Pro4 • Mendukung Intel® UHD Graphics Built-in Visuals: Intel® Quick Sync Video dengan AVC, MVC (S3D) dan MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® UHD Graphics • DirectX 12 • Encode/Decode HWA: AVC/H.264, HEVC/H.265 8-bit, HEVC/ H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (hanya Decode),...
  • Seite 172 2230/2242/2260/2280/22110 M.2 PCI Express hingga Gen3 x4 (32 Gb/s)** ** Mendukung Intel® Optane Technology ** Mendukung SSD NVMe sebagai disk boot ** Mendukung Kit ASRock U.2 • 1 x Header Port COM Konektor • 1 x Header TPM • 1 x Header LED Daya dan Speaker • 2 x Header LED RGB...
  • Seite 173 • FCC, CE Sertifikasi • Mendukung ErP/EuP (memerlukan catu daya untuk ErP/EuP) * Untuk informasi rinci tentang produk, kunjungi situs web kami:http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat bantu overclocking pihak ketiga.
  • Seite 174: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
  • Seite 175: Declaration Of Conformity

    Address: Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product Product Name : Motherboard B365 Pro4 Model Number : Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: is device complies with part 15 of the FCC Rules. Operation is subject to the...
  • Seite 176: Eu Declaration Of Conformity

    EU Declaration of Conformity For the following equipment: Motherboard (Product Name) B365 Pro4 / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) EMC —Directive 2014/30/EU (from April 20th, 2016)

Inhaltsverzeichnis