ASROCK B365 Pro4 Handbuch Seite 26

Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 27)
RGB LED Headers
(4-pin RGB_LED1)
(see p.1, No. 22)
(4-pin RGB_LED2)
(see p.1, No. 6)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 23)
24
Please connect a Thunderbolt™
1
add-in card (AIC) to the
Thunderbolt AIC connector via
the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default slot).
RGB header is used to connect
1
RGB LED extension cable which
12V G R B
allows users to choose from
various LED lighting effects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 35 for
further instructions on this
header.
This header is used to connect
1
Addressable LED extension cable
GND
DO_ADDR
which allows users to choose
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 36 for
further instructions on this
header.