Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Version 1.0
Published December 2018
Copyright©2018 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK B365M Phantom Gaming 4

  • Seite 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 2 You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply) The terms HDMI®...
  • Seite 3: Motherboard-Layout

    B365M Phantom Gaming 4 Motherboard Layout CPU_FAN2/ ATX12V1 CPU_FAN1 USB 3.1 Gen1 T: USB3 B: USB4 USB 3.1 Gen1 Top: CHA_FAN1/ T: USB1 RJ-45 B: USB2 PCIE1 B365M Phantom Gaming 4 Intel B365 CMOS PCIE2 Battery PCIE3 BIOS SPK_CI1 AUDIO...
  • Seite 4: Inhaltsverzeichnis

    No. Description ATX 12V Power Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) CPU/Water Pump Fan Connector (CPU_FAN2/WP) Addressable LED Header (A_RGB_LED1) ATX Power Connector (ATXPWR1) USB 3.1 Gen1 Header (USB3_5_6) RGB LED Header (RGB_LED2) SATA3 Connectors (SATA3_2_3)
  • Seite 5: No. Description

    B365M Phantom Gaming 4 I/O Panel No. Description No. Description USB 2.0 Ports (USB12) Optical SPDIF Out Port LAN RJ-45 Port* USB 3.1 Gen1 Ports (USB3_1_2) Central / Bass (Orange) USB 3.1 Gen1 Ports (USB3_3_4) Rear Speaker (Black) USB 3.1 Gen1 Type-C Port (USB3_TC_1) Line In (Light Blue) DisplayPort 1.2...
  • Seite 6 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange...
  • Seite 7: Package Contents

    If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Seite 8 1.2 Specifications Platform • Micro ATX Form Factor • Supports 9 and 8 Gen Intel® Core Processors (Socket 1151) • Supports CPU up to 95W • Digi Power design • 8 Power Phase design • Supports Intel® Turbo Boost 2.0 Technology Chipset • Intel®...
  • Seite 9 B365M Phantom Gaming 4 • HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit, HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decode only), MPEG2, MJPEG, VC-1 (Decode only) • Dual graphics outputs: HDMI and DisplayPort 1.2 • Supports HDMI 1.4 with max. resolution up to 4K x 2K (4096x2160) @ 30Hz • Supports DisplayPort 1.2 with max.
  • Seite 10: Cpu Fan Connector (Cpu_Fan1)

    PCI Express module up to Gen3 x4 (32 Gb/s)** ** Supports Intel® Optane Technology ** Supports NVMe SSD as boot disks ** Supports ASRock U.2 Kit • 1 x COM Port Header Connector • 1 x TPM Header • 1 x Chassis Intrusion and Speaker Header • 2 x RGB LED Headers...
  • Seite 11 • Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM, VPPM, PCH 1.0V, VCCSA, VCCST • Microsoft® Windows® 10 64-bit • FCC, CE Certifica- tions • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com...
  • Seite 12 Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Seite 13 B365M Phantom Gaming 4 Chapter 2 Installation This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Seite 14: Installing The Cpu

    2.1 Installing the CPU 1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Seite 15 B365M Phantom Gaming 4...
  • Seite 16 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Seite 17 B365M Phantom Gaming 4 2.2 Installing the CPU Fan and Heatsink...
  • Seite 18 2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs. 2.
  • Seite 19 B365M Phantom Gaming 4...
  • Seite 20 2.4 Expansion Slots (PCI Express Slots) There are 3 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Seite 21 B365M Phantom Gaming 4 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”.
  • Seite 22 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Seite 23 B365M Phantom Gaming 4 Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 12) header. PLED+ PLED+ PLED- Serial ATA3 Connectors These six SATA3...
  • Seite 24 Front Panel Audio Header This header is for PRESENCE# (9-pin HD_AUDIO1) connecting audio devices MIC_RET OUT_RET (see p.1, No. 25) to the front audio panel. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup- port HDA to function correctly.
  • Seite 25 B365M Phantom Gaming 4 CPU/Water Pump Fan This motherboard FAN_SPEED_CONTROL CPU_FAN_SPEED Connector provides a 4-Pin water FAN_VOLTAGE (4-pin CPU_FAN2/WP) cooling CPU fan (see p.1, No. 5) connector. If you plan to connect a 3-Pin CPU water cooler fan, please connect it to Pin 1-3.
  • Seite 26 RGB LED Headers These two RGB headers are used (4-pin RGB_LED1) to connect RGB LED extension 12V G R (see p.1, No. 22) cable which allows users to choose from various LED (4-pin RGB_LED2) lighting effects. Caution: Never install the RGB (see p.1, No.
  • Seite 27 B365M Phantom Gaming 4 2.7 Post Status Checker Post Status Checker (PSC) diagnoses the computer when users power on the machine. It emits a red light to indicate whether the CPU, memory, VGA or stor- age is dysfunctional. The lights go off if the four mentioned above are functioning...
  • Seite 28 2.8 M.2 WiFi/BT Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key E) supports type 2230 WiFi/BT module. Installing the WiFi/BT module Step 1 Prepare a type 2230 WiFi/BT module...
  • Seite 29 B365M Phantom Gaming 4 Step 4 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.
  • Seite 30 2.9 M.2_SSD (NGFF) Module Installation Guide (M2_1) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1) supports M Key type 2242/2260/2280 M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
  • Seite 31 B365M Phantom Gaming 4 Step 3 Before installing a M.2 (NGFF) SSD module, please loosen the screws to remove the M.2 heatsink. Step 4 Prepare the M.2 standoff that comes with the package. Then hand tighten the standoff into the desired nut location on the motherboard.
  • Seite 32 PCIe 2260 SD6PP4M-256G TEAM PCIe3 x4 2280 TM8FP2240G0C101 TEAM PCIe3 x4 2280 TM8FP2480GC110 PCIe3 x4 2280 WDS256G1X0C-00ENX0 (NVME) PCIe3 x4 2280 WDS512G1X0C-00ENX0 (NVME) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Seite 33 B365M Phantom Gaming 4 2.10 M.2_SSD (NGFF) Module Installation Guide (M2_2) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_2) supports M Key type 2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module...
  • Seite 34 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand.
  • Seite 35 B365M Phantom Gaming 4 M.2_SSD (NGFF) Module Support List Vendor Interface Length ADATA SATA3 2280 AXNS381E-128GM-B ADATA SATA3 2280 ASU800NS38-256GT-C ADATA SATA3 2280 AXNS381E-256GM-B ADATA SATA3 2280 ASU800NS38-512GT-C ADATA PCIe3 x4 2280 ASX7000NP-128GT-C ADATA PCIe3 x4 2280 ASX8000NP-256GM-C ADATA PCIe3 x4...
  • Seite 36 SATA3 2280 VLM100-240G-2280RGB V-Color SATA3 2280 VSM100-240G-2280 SATA3 2280 WDS100T1B0B-00AS40 SATA3 2280 WDS240G1G0B-00RC30 PCIe3 x4 2280 WDS256G1X0C-00ENX0 (NVME) PCIe3 x4 2280 WDS512G1X0C-00ENX0 (NVME) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Seite 37 B365M Phantom Gaming 4 2.11 ASRock RGB LED ASRock RGB LED is a lighting control utility specifically designed for unique individuals with sophisticated tastes to build their own stylish colorful lighting system. Simply by connecting the LED strip, you can customize various lighting schemes and patterns, including Static, Breathing, Strobe, Cycling, Music, Wave and more.
  • Seite 38 ADDR_LED1 DO_ADDR VOUT B365M Phantom Gaming 4 1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be damaged. 2. Before installing or removing your RGB LED cable, please power off your system and unplug the power cord from the power supply.
  • Seite 39 ASRock RGB LED Utility Now you can adjust the RGB LED color through the ASRock RGB LED utility. Download this utility from the ASRock Live Update & APP Shop and start coloring your PC style your way! Drag the tab to customize your preference.
  • Seite 40: Einleitung

    1 Einleitung Vielen Dank, dass Sie sich für das ASRock B365M Phantom Gaming 4 entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Seite 41: Technische Daten

    B365M Phantom Gaming 4 1.2 Technische Daten Plattform • Micro-ATX-Formfaktor Prozessor • Unterstützt Intel® Core -Prozessoren (Sockel 1151) der 8 & Generation • Unterstützt CPU bis 95 W • Digi Power design • 8-Leistungsphasendesign • Unterstützt Intel® Turbo Boost 2.0-Technologie Chipsatz • Intel®...
  • Seite 42 • HWA encodieren/decodieren: AVC/H.264, HEVC/H.265 8 bit, HEVC/H.265 10 bit, VP8, VP9 8 bit, VP9 10 bit (nur Dekodierung), MPEG2, MJPEG, VC-1 (nur Dekodierung) • Dualer Grafikkartenausgänge: HDMI- und DisplayPort 1.2 • Unterstützt HDMI 1.4 mit maximaler Auflösung von 4K x 2K (4096 x 2160) bei 30Hz • Unterstützt DisplayPort 1.2 mit maximaler Auflösung von 4K x 2K (4096 x 2304) bei 60 Hz...
  • Seite 43: Anschluss

    B365M Phantom Gaming 4 • 1 x RJ-45-LAN-Port mit LED (Aktivität/Verbindung-LED und Geschwindigkeit-LED) • HD-Audioanschlüsse: Hintere Lautsprecher / Zentral / Bass / Line-in / Vorderer Lautsprecher / Mikrofon (goldene Audioanschlüsse) Speicher • 6 x SATA-III-6,0-Gb/s-Abschluss, unterstützt RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology 17), NCQ, AHCI und Hot-Plugging* * Wenn M2_2 durch ein SATA-Typ-M.2-Gerät belegt ist, wird...
  • Seite 44: Funktion

    • Spannungsüberwachung: +12 V, +5 V, +3,3 V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST Betriebssys- • Microsoft® Windows® 10, 64 Bit Zertifizierun- • FCC, CE • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) * Detaillierte Produktinformationen finden Sie auf unserer Webseite:http://www.asrock.com...
  • Seite 45 B365M Phantom Gaming 4 Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind. Eine Übertaktung kann sich auf die Stabilität Ihres Systems auswirken und sogar Komponenten und Geräte Ihres Systems beschädi-...
  • Seite 46: Jumpereinstellung

    1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper- Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. CMOS-löschen-Jumper Kurzgeschlossen: CMOS löschen (CLRCMOS1) Offen: Standard 2-poliger Jumper (siehe S.
  • Seite 47: Integrierte Stiftleisten Und Anschlüsse

    B365M Phantom Gaming 4 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen.
  • Seite 48 Betrieb-LED- und Bitte verbinden Sie die Be- SPEAKER DUMMY Lautsprecher-Stiftleiste trieb-LED des Gehäuses und den DUMMY (7-polig, SPK_PLED1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 12) Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese sechs SATA-III-Anschlüsse (SATA3_0: unterstützen SATA-Datenkabel siehe S. 1, Nr. 15) für interne Speichergeräte mit (SATA3_1: einer Datenübertragungsgeschwin...
  • Seite 49 B365M Phantom Gaming 4 Audiostiftleiste Diese Stiftleiste dient dem PRESENCE# (Frontblende) Anschließen von Audiogeräten MIC_RET OUT_RET (9-polig, HD_AUDIO1) an der Frontblende. (siehe S. 1, Nr. 25) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt.
  • Seite 50 CPU-/Wasserpumpen- Dieses Motherboard bie- FAN_SPEED_CONTROL Lüfteranschluss CPU_FAN_SPEED tet einen 4-poligen Was- FAN_VOLTAGE (4-polig, CPU_FAN2/WP) serkühlung-CPU-Lüfteran- (siehe S. 1, Nr. 5) schluss. Falls Sie einen 3-pol- igen CPU-Wasserkühlerlüfter anschließen möchten, verbinden Sie ihn bitte mit Kontakt 1 bis 3. ATX-Netzanschluss Dieses Motherboard bietet (24-polig, ATXPWR1) einen 24-poligen ATX-Netzan- (siehe S.
  • Seite 51 B365M Phantom Gaming 4 RGB-LED-Stiftleisten Diese beiden RGB-Stiftleisten (4-polig, RGB_LED1) dienen dem Anschließen eines 12V G R (siehe S. 1, Nr. 22) RGB-LED-Erweiterungskabels, das dem Nutzer die Auswahl zwis- (4-polig, RGB_LED2) chen verschiedenen LED-Lichtef- (siehe S. 1, Nr. 9) fekten ermöglicht.
  • Seite 52: Contenu De L'emballage

    à modification sans préavis. En cas de modifications du présent document, la version mise à jour sera disponible sur le site Internet ASRock sans notification préalable. Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez.
  • Seite 53 B365M Phantom Gaming 4 1.2 Spécifications Plateforme • Facteur de forme Micro ATX Processeur • Prend en charge les processeurs 8 et 9 génération Intel® Core (socket 1151) • Prend en charge les unités centrales jusqu’à 95W • Digi Power design • Alimentation à...
  • Seite 54 • Codage/Décodage HWA : AVC/H.264, HEVC/H.265 8 bits, HEVC/H.265 10 bits, VP8, VP9 8 bits, VP9 10 bits (Encodage uniquement), MPEG2, MJPEG, VC-1 (Encodage uniquement) • Double sorties graphiques : HDMI et DisplayPort 1.2 • Prend en charge la technologie HDMI 1.4 avec résolution maximale de 4K x 2K (4096x2160) @ 30Hz • Prend en charge la technologie DisplayPort 1.2 avec résolution maximale de 4K x 2K (4096x2304) @ 60 Hz...
  • Seite 55 PCI Express jusqu'à Gen3 x4 (32 Go/s)** ** Prend en charge Intel® Optane Technology ** Prend en charge les SSD NVMe comme disques de démarrage ** Prend en charge le kit ASRock U.2 Connecteur • 1 x embase pour port COM • 1 x embase TPM • 1 x prise DEL d’alimentation et emplacement sur châssis...
  • Seite 56: Système D'exploitation

    • Surveillance de la tension d’alimentation : +12V, +5V, +3,3V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST Système • Microsoft® Windows® 10 64 bits d’exploitation Certifications • FCC, CE • ErP/EuP Ready (alimentation ErP/EuP ready requise) * pour des informations détaillées de nos produits, veuillez visiter notre site :http://www.asrock.com...
  • Seite 57 B365M Phantom Gaming 4 Il est important de signaler que l’ o verclocking présente certains risques, incluant des modifications du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’ o utils d’ o verclocking développés par des tiers. La stabilité de votre système peut être affectée par ces pratiques, voire provoquer des dommages aux composants et aux périphériques du système.
  • Seite 58 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court- circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ».
  • Seite 59 B365M Phantom Gaming 4 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de cap- uchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Seite 60 Prise DEL d’alimentation Veuillez brancher la DEL SPEAKER DUMMY et haut-parleur d'alimentation du châssis et le DUMMY (SPK_PLED1 à 7 broches) haut-parleur du châssis sur ce (voir p.1, No. 12) connecteur. PLED+ PLED+ PLED- Connecteurs Serial ATA3 Ces six connecteurs SATA3 sont (SATA3_0: compatibles avec les câbles de voir p.1, No.
  • Seite 61 B365M Phantom Gaming 4 Embase audio du panneau Cette embase sert au PRESENCE# frontal branchement des appareils MIC_RET OUT_RET (HD_AUDIO1 à 9 broches) audio au panneau audio (voir p.1, No. 25) frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L’ a udio haute définition prend en charge la technologie Jack Sensing (détection de la fiche), mais le panneau grillagé...
  • Seite 62 Connecteur pour ventilateur de Cette carte mère est dotée d’un FAN_SPEED_CONTROL CPU_FAN_SPEED processeur /pompe à eau connecteur pour ventilateur de FAN_VOLTAGE (CPU_FAN2/WP à 4 broches) processeur à refroidissement par (voir p.1, No. 5) eau à 4 broches. Si vous envisagez de connecter un ventilateur de re- froidisseur d'eau pour processeur à...
  • Seite 63 B365M Phantom Gaming 4 Embase LED RVB Ces deux embases RVB servent (RGB_LED1 à 4 broches) à connecter le câble d'extension 12V G R (voir p.1, No. 22) LED RVB qui permet aux utilisa- teurs de choisir parmi plusieurs (RGB_LED2 à 4 broches) effets lumineux LED.
  • Seite 64: Contenuto Della Confezione

    Per il supporto tecnico correlato a questa scheda madre, visitare il nostro sito Web per informazioni specifiche relative al modello attualmente in uso. È possibile trovare l'elenco di schede VGA più recenti e di supporto di CPU anche sul sito Web di ASRock. Sito Web di ASRock http://www.asrock.com.
  • Seite 65 B365M Phantom Gaming 4 1.2 Specifiche Piattaforma • Fattore di forma Micro ATX • Supporta processori 8 Gen e 9 Generation Intel® Core (Socket 1151) • Supporto di CPU fino a 95W • Digi Power design • Potenza a 8 fasi • Supporta la tecnologia Intel®...
  • Seite 66 • Codifica/decodifica HWA: AVC/H.264, HEVC/H.265 8-bit, HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (solo decodifica), MPEG2, MJPEG, VC-1 (solo decodifica) • Doppia uscita grafica: HDMI e DisplayPort 1.2 • Supporta HDMI 1.4 con risoluzione massima fino a 4K x 2K (4096 x 2160) a 30Hz • Supporta DisplayPort 1.2 con risoluzione massima fino a 4K x 2K (4096x2304) a 60 Hz...
  • Seite 67 B365M Phantom Gaming 4 • 1 x porta LAN RJ-45 con LED (ACT/LINK LED e SPEED LED) • Connettori audio HD: altoparlante posteriore/centrale/basso/ ingresso linea/altoparlante anteriore/microfono (connettori audio dorati) Archiviazione • 6 x connettori SATA3 6,0 Gb/s, supportano RAID (RAID 0,...
  • Seite 68 • Monitoraggio tensione: +12V, +5V, +3,3V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64 bit Certificazioni • FCC, CE • ErP/EuP Ready (è necessaria alimentazione ErP/EuP ready) * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web:http://www.asrock.com...
  • Seite 69 B365M Phantom Gaming 4 Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazi- one delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di strumenti di overclocking di terze parti. L'overclocking può influenzare la stabilità del sistema o perfino provocare danni ai componenti e ai dispositivi del sistema.
  • Seite 70 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". Jumper per azzerare la CMOS Cortocircuitato: Azzerare la CMOS (CLRCMOS1) Aperto: Predefinito...
  • Seite 71 B365M Phantom Gaming 4 1.4 Header e connettori su scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà...
  • Seite 72 Connettore LED Collegare i LED alimentazione e SPEAKER DUMMY alimentazione e l’altoparlante a questo connet- DUMMY altoparlante tore. (SPK_PLED1 a 7 pin) (vedere pag. 1, n. 12) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi sei connettori SATA3 (SATA3_0: supportano cavi dati SATA vedere pag.
  • Seite 73 B365M Phantom Gaming 4 Header audio pannello Questo header serve a PRESENCE# MIC_RET anteriore collegare i dispositivi audio al OUT_RET (HD_AUDIO1 a 9 pin) pannello audio anteriore. (vedere pag. 1, n. 25) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo chassis deve supportare HDA per funzionare correttamente.
  • Seite 74 Connettore ventola CPU / Questa scheda madre è dotata FAN_SPEED_CONTROL CPU_FAN_SPEED pompa dell'acqua di un connettore per la ventola FAN_VOLTAGE (CPU_FAN2/WP a 4 pin) della CPU con raffreddamento (vedere pag. 1, n. 5) ad acqua a 4 pin. Se si decide di collegare una ventola della CPU con raffreddamento ad acqua a 3 pin, collegarla al pin 1-3.
  • Seite 75 B365M Phantom Gaming 4 Collettore LED RGB Questi due collettori RGB ven- (RGB_LED1 a 4 pin) gono utilizzati per collegare la 12V G R (vedere pag. 1, n. 22) prolunga LED RGB, che consente agli utenti di scegliere tra vari (RGB_LED2 a 4 pin) effetti di illuminazione a LED.
  • Seite 76: Contenido Del Paquete

    ASRock sin previo aviso. Si necesita asistencia técnica relacionada con esta placa base, visite nuestro sitio web para obtener información específica sobre el modelo que esté utilizando. Podrá encontrar las últimas tarjetas VGA, así como la lista de compatibilidad de la CPU, en el sitio web de ASRock. Sitio web de ASRock http://www.asrock.com.
  • Seite 77 B365M Phantom Gaming 4 1.2 Especificaciones Plataforma • Factor de forma Micro ATX • Compatible con 8 generación de procesadores Intel® Core (Socket 1151) • Admite CPU de hasta 95 W. • Digi Power design • Diseño de 8 fases de alimentación • Admite la tecnología Intel®...
  • Seite 78 • Codificación y descodificación HWA: AVC/H.264, HEVC/H.265 8 bits, HEVC/H.265 10 bits, VP8, VP9 8 bits, VP9 10 bits (solo descodificar), MPEG2, MJPEG, VC-1 (solo descodificar) • Salidas gráficas dual: HDMI y DisplayPort 1.2 • Compatible con HDMI 1.4 con una resolución máxima de 4K x 2K (4096x2160) a 30Hz • Compatible con DisplayPort 1.2 con una resolución máxima de 4K x 2K (4096x2304) a 60 Hz...
  • Seite 79 ** Compatible con la Tecnología Optane de Intel® ** Admite unidad de estado sólido de NVMe como disco de arran- ** Admite el kit U.2 de ASRock Conector • 1 x Base de conexiones de puerto COM • 1 x Conector TPM • 1 x cabezal de intrusión de chasis y de altavoces...
  • Seite 80 VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64 bits Certifica- • FCC y CE ciones • Preparado para ErP/EuP (se necesita una fuente de alimentación preparada para ErP/EuP) * Para obtener información detallada del producto, visite nuestro sitio Web:http://www.asrock.com...
  • Seite 81 B365M Phantom Gaming 4 Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de overclocking, incluido el ajuste de la BIOS, aplicando la tecnología de overclocking liberada o utilizando las herramientas de overclocking de otros fabricantes. El overclocking puede afectar a la estabilidad del sistema e, incluso, dañar los componentes y dispositivos del sistema.
  • Seite 82 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los contactos, el puente queda “Corto”. Si no coloca la tapa de puente en los contactos, el puente queda “Abierto”. Puente de borrado de CMOS Corto: Borrado de CMOS (CLRCMOS1)
  • Seite 83 B365M Phantom Gaming 4 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base.
  • Seite 84 LED de alimentación y Conecte el LED de alimentación SPEAKER DUMMY base de conexiones para la del chasis y el altavoz del chasis DUMMY altavoz a esta base de conexiones. (SPK_PLED1 de 7 contactos) PLED+ (consulte la pág. 1, nº 12) PLED+ PLED- Conectores Serie ATA3...
  • Seite 85 B365M Phantom Gaming 4 Cabezal de audio del panel Este cabezal se utiliza para PRESENCE# frontal conectar dispositivos de MIC_RET OUT_RET (HD_AUDIO1 de 9 audio al panel de audio contactos) frontal. OUT2_L (consulte la pág. 1, nº 25) J_SENSE OUT2_R...
  • Seite 86 Conector del ventilador de Esta placa base proporciona un FAN_SPEED_CONTROL CPU_FAN_SPEED la bomba de agua/CPU conector de ventilador de CPU de FAN_VOLTAGE (CPU_FAN2/WP de 4 refrigeración por agua de 4 con- contactos) tactos. Si tiene pensando conectar (consulte la pág. 1, nº 5) un ventilador de disipador por agua de CPU de 3 contactos, conéctelo al contacto 1-3.
  • Seite 87 B365M Phantom Gaming 4 Cabezales de LED RGB Estas dos bases de conexiones (RGB_LED1 de RGB se utilizan para conectar 12V G R 4 contactos) el alargador de LED RGB que (consulte la pág. 1, nº 22) permite a los usuarios elegir entre varios efectos de iluminación de...
  • Seite 88: Комплект Поставки

    веб-сайте ASRock также можно найти самый последний перечень поддерживаемых VGA- карт и ЦП. Веб-сайт ASRock http://www.asrock.com. 1.1 Комплект поставки • Материнская плата ASRock B365M Phantom Gaming 4 (форм-фактор Micro ATX) • Краткое руководство по установке ASRock B365M Phantom Gaming 4 • Диск с ПО ASRock B365M Phantom Gaming 4 • 1 экран...
  • Seite 89: Технические Характеристики

    B365M Phantom Gaming 4 1.2 Технические характеристики Платформа • Форм-фактор Micro ATX го го ЦП • Поддержка процессоров 8 и 9 поколения Intel® Core (Socket 1151) • Поддерживаются ЦП мощностью до 95 Вт. • Digi Power design • Система питания 8 • Поддерживается...
  • Seite 90 • Программно-аппаратное кодирование-декодирование: AVC/H.264, HEVC/H.265 8 бит, HEVC/H.265 10 бит, VP8, VP9 8 бит, VP9 10 бит (только декодирование), MPEG2, MJPEG, VC-1 (только декодирование) • Два графических выходы: HDMI и DisplayPort 1.2 • Поддержка HDMI 1.4 с максимальным разрешением до 4K x 2K (4096x2160) при...
  • Seite 91 B365M Phantom Gaming 4 • 1 порт ЛВС RJ-45 с индикаторами («Активность/ Соединение» и «Скорость») • Разъемы HD Audio: тыловые АС / центральная АС / сабвуфер / линейный вход / фронтальные АС / микрофон (позолоченные контакты) Запоминающие • 6 разъемов SATA3 с пропускной способностью 6,0 Гб/ устройства...
  • Seite 92 • Контроль напряжений: +12 В, +5 В, +3,3 В, напряжение ядра ЦП, DRAM, VPPM, PCH 1,0B, VCCSA, VCCST • Microsoft® Windows® 10 (64-разрядная) Операционные системы Сертификация • FCC, CE • Совместимость с ErP/EuP (необходим блок питания, соответствующий стандарту ErP/EuP) * С дополнительной информацией об изделии можно ознакомиться на веб-сайте:http://www.asrock.com...
  • Seite 93 B365M Phantom Gaming 4 Следует учитывать, что разгон процессора, включая изменение настроек BIOS, применение технологии Untied Overclocking и использование инструментов разгона независимых производителей, сопряжен с определенным риском. Разгон процессора может снизить стабильность системы или даже привести к повреждению ее компонентов и устройств.
  • Seite 94 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке перемычки-колпачка на контакты перемычка «замкнута». Если перемычка-колпачок на контакты не установлена, перемычка «разомкнута». Перемычка сброса Замкнута: Сброс настроек CMOS настроек CMOS Разомкнута: По умолчанию 2-контактная перемычка (CLRCMOS1) (см. стр. 1, № 23) CLRCMOS1 используется...
  • Seite 95 B365M Phantom Gaming 4 1.4 Колодки и разъемы, расположенные на системной плате Расположенные на системной плате колодки и разъемы НЕ являются перемычками. НЕ устанавливайте на эти колодки и разъемы перемычки-колпачки. Установка перемычек-колпачков на эти колодки и разъемы может вызвать неустранимое...
  • Seite 96 Колодка светодиодного Предназначена для SPEAKER DUMMY индикатора питания и подключения светодиодного DUMMY динамика корпуса индикатора питания и (7-контактная, динамика корпуса. SPK_PLED1) PLED+ (см. стр. 1, № 12) PLED+ PLED- Разъемы Serial ATA3 Эти шесть разъемов (SATA3_0: SATA3 предназначены для см. стр. 1, № 15) подключения...
  • Seite 97 B365M Phantom Gaming 4 Аудиоколодка передней Эта колодка предназначена PRESENCE# панели для подключения MIC_RET OUT_RET (9-контактов, аудиоустройств к передней HD_AUDIO1) аудиопанели. (см. стр. 1, № 25) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но для е правильной работы необходимо, чтобы провод панели корпуса поддерживал...
  • Seite 98 Разъем для вентилятора Данная материнская плата FAN_SPEED_CONTROL CPU_FAN_SPEED или помпы водяного оснащена 4-контактным FAN_VOLTAGE охлаждения ЦП разъемом для системы водяного (4-контактный охлаждения ЦП. 3-контактную CPU_FAN2/WP) систему водяного охлаждения (см. стр. 1, № 5) ЦП следует подключать к контактам 1–3. Разъем питания АТХ Эта...
  • Seite 99 B365M Phantom Gaming 4 Колодки для Эти две колодки для RGB- подключения подсветки служат для 12V G R светодиодной RGB- подключения удлинительного подсветки. кабеля светодиодной RGB- (4-контактная, подсветки, которая позволяет RGB_LED1) реализовать различные (см. стр. 1, № 22) световые эффекты.
  • Seite 100: Conteúdo Da Embalagem

    Caso ocorram modificações a esta documentação, a versão atualizada estará disponível no site da ASRock sem aviso prévio. Se precisar de assistência técnica relacionada a esta placa principal, visite o nosso site para obter informações específicas sobre o modelo que estiver utilizando.
  • Seite 101: Especificações

    B365M Phantom Gaming 4 1.2 Especificações Plataforma • Micro ATX Form Factor ª ª • Suporta 8 Ger. e 9 Geraão de Processadores Intel® Core (Soquete 1151) • Suporta CPU até 95W • Digi Power design • Design com 8 fases de alimentação • Suporta a tecnologia Intel®...
  • Seite 102 • HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit, HEVC/ H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decodificar apenas), MPEG2, MJPEG, VC-1 (Decodificar apenas) • Saídas gráficos dupla: HDMI e DisplayPort 1.2 • Suporta HDMI 1.4 com resolução máx. até 4K x 2K (4096x2160) @ 30Hz • Suporta DisplayPort 1.2 com resolução máx.
  • Seite 103 B365M Phantom Gaming 4 • 1 x Porta LAN RJ-45 com LED (LED ACT/LINK e LED DE VELOCIDADE) • Fichas de áudio HD: Alto-falante posterior / Central / Graves / Entrada de linha / Alto-falante frontal / Microfone( Entradas de Áudio Gold)
  • Seite 104 DRAM, VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64-bit Certificações • FCC, CE • Preparada para ErP/EuP (é necessária uma fonte de alimentação preparada para ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site:http://www.asrock.com...
  • Seite 105 B365M Phantom Gaming 4 Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramentas de overclocking de terceiros. O overclocking poderá afetar a estabilidade do sistema ou mesmo causar danos nos componentes e dispositivos do seu sistema.
  • Seite 106 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto". Apagar o Jumper CMOS Curto: Apagar CMOS (CLRCMOS1)
  • Seite 107 B365M Phantom Gaming 4 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe.
  • Seite 108 LED de alimentação e Conecte o LED de alimentação SPEAKER DUMMY Cabeçote de Autofalante do chassi e o autofalante do DUMMY (SPK_PLED1 de 7 pinos) chassi a este cabeçote. (ver p.1, N.º 12) PLED+ PLED+ PLED- Conectores série ATA3 Estes seis conectores SATA3 (SATA3_0: suportam cabos de dados ver p.1, N.º...
  • Seite 109 B365M Phantom Gaming 4 Suporte de áudio do painel Este suporte destina-se à PRESENCE# frontal conexão dos dispositivos MIC_RET OUT_RET (HD_AUDIO1 de 9 pinos) de áudio no painel de áudio (ver p.1, N.º 25) frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1.
  • Seite 110 Conector da ventoinha de Esta placa mãe inclui um conec- FAN_SPEED_CONTROL CPU_FAN_SPEED bomba de água/CPU tor de ventilador da CPU de FAN_VOLTAGE (CPU_FAN2/WP de 4 pinos) refrigeração a água de 4 pinos. (ver p.1, N.º 5) Se você pretende conectar um ventilador de refrigeração a água da CPU de 3 pinos, por favor, conecte-o ao Pino 1-3.
  • Seite 111 B365M Phantom Gaming 4 Cabeçotes de LED RGB Estes dois cabeçotes RGB são (RGB_LED1 de 4 pinos) usados para conectar o cabo de 12V G R (ver p.1, N.º 22) extensão de LED RGB que per- mite aos usuários escolher entre (RGB_LED2 de 4 pinos) vários efeitos de iluminação...
  • Seite 112: Zawartość Opakowania

    W przypadku jakichkol- wiek modyfikacji tej dokumentacji, zaktualizowana wersja będzie dostępna na stronie internetowej ASRock, bez dalszego powiadomienia. Jeśli wymagana jest pomoc techniczna w odniesieniu do tej płyty głównej, należy odwiedzić stronę internetową w celu uzyskania specyficznych informacji o używanym modelu.
  • Seite 113 B365M Phantom Gaming 4 1.2 Specyfikacje Platforma • Współczynnik kształtu Micro ATX • Obsługa 8 generacji procesorów Intel® Core (Socket 1151) • Obsługa CPU do 95W • Digi Power design • Sekcja zasilania 8 Power Phase Design • Obsługa technologii Intel® Turbo Boost 2.0 Chipset • Intel®...
  • Seite 114 • Kodowanie/dekodowanie HWA: AVC/H.264, HEVC/H.265 8-bit, HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (tylko dekodowanie), MPEG2, MJPEG, VC-1 (tylko dekodowanie) • Podwójne wyjścia graficzne: HDMI i DisplayPort 1.2 • Obsługa HDMI 1.4 z maks. rozdzielczością do 4K x 2K (4096x2160) przy 30Hz • Obsługa DisplayPort 1.2 z maks.
  • Seite 115 B365M Phantom Gaming 4 • 1 x port LAN RJ-45 z LED (LED ACT/LINK i LED SPEED) • Gniazda audio HD: Głośnik tylny / Centralny / Basy / Wejście liniowe / Głośnik przedni / Mikrofon (Pozłacane gniazda audio) Przechowy- • 6 x złącza SATA3 6,0 Gb/s, obsługa (RAID 0, RAID 1, RAID 5,...
  • Seite 116 VPPM, PCH 1,0V, VCCSA, VCCST System • Microsoft® Windows® 10 64-bitowy operacyjny Certyfikaty • FCC, CE • Gotowość do obsługi ErP/EuP (Wymagane zasilanie z gotow- ością obsługi ErP/EuP) * Dla uzyskania szczegółowej informacji o produkcie, należy odwiedzić naszą stronę internetową:http://www.asrock.com...
  • Seite 117 B365M Phantom Gaming 4 Należy pamiętać, że przetaktowywanie jest związane z pewnym ryzykiem, włącznie z regulacją ustawień w BIOS, zastosowaniem Untied Overclocking Technology lub używaniem narzędzi przetaktowywania innych firm. Przetaktowywanie może wpływać na stabilność systemu lub nawet powodować uszkodzenie komponentów i urządzeń systemu. Powinno to zostać zrobione na własne...
  • Seite 118 1.3 Ustawienia zworek Ta ilustracja pokazuje ustawienia zworek. Po umieszczeniu nasadki zworki na pinach, zworka jest “Zwarta”. Jeśli nasadka zworki nie jest umieszczona na pinach, zworka jest “Otwarta”. Zworka usuwania danych Zwarcie: Usunięcie danych z pamięci CMOS z pamięci CMOS Otwarcie: Domyślne 2-pinowa zworka (CLRCMOS1)
  • Seite 119 B365M Phantom Gaming 4 1.4 Wbudowane złącza główkowe i inne złącza Wbudowane złącza główkowe i inne złącza są bezzworkowe. NIE należy umieszczać zworek nad tymi złączami główkowymi i złączami. Umieszczanie zworek nad złączami główkowymi i złączami spowoduje trwałe uszkodzenie płyty głównej.
  • Seite 120 Dioda LED zasilania i Podłącz to tego złącza SPEAKER DUMMY złącze główkowe głośnika główkowego diodę LED zasila- DUMMY (7-pinowe SPK_PLED1) nia obudowy i głośnik obudowy (sprawdź s.1, Nr 12) PLED+ PLED+ PLED- Złącza Serial ATA3 Te sześć złączy SATA3 obsługuje (SATA3_0: kable danych SATA dla sprawdź...
  • Seite 121 B365M Phantom Gaming 4 Złącze główkowe audio To złącze główkowe służy do PRESENCE# panelu przedniego podłączania urządzeń audio MIC_RET OUT_RET (9-pinowe HD_AUDIO1) do przedniego panelu audio. (sprawdź s.1, Nr 25) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio obsługuje wykrywanie gniazda, ale aby działać prawidłowo przewód panelu na obudowie musi obsługiwać...
  • Seite 122 Złącze wentylatora pompy Ta płyta główna udostępnia FAN_SPEED_CONTROL CPU_FAN_SPEED wodnej /CPU 4-pinowe złącze obudowy FAN_VOLTAGE (4-pinowe CPU_FAN2/WP) wentylatora chłodzenia wod- (sprawdź s.1, Nr 5) nego CPU. Jeśli planowane jest podłączenie 3-pinowego wentyla- tora chłodzenia wodnego CPU, należy je podłączyć do pinów 1-3. Złącze zasilania ATX Ta płyta główna udostępnia (24-pinowe ATXPWR1)
  • Seite 123 B365M Phantom Gaming 4 Złącza główkowe LED Te złącza główkowe RGB są uży- wane do podłączenia przedłużacza 12V G R (4-pinowe RGB_LED1) LED RGB, który umożliwia (sprawdź s.1, Nr 22) użytkownikom wybór spośród różnych efektów światła LED. Ostrzeżenie: Nigdy nie należy (4-pinowe RGB_LED2) (sprawdź...
  • Seite 124 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 문서의 내용은 예 고 없이 변경될 수 있습니다 . 이 설명서가 변경될 경우 , 업데이트된 버전은 ASRock 의 웹 사이트에서 추가 통지 없이 제공됩니다 . 이 마더보드와 관련하여 기술적 지원이 필요한...
  • Seite 125 B365M Phantom Gaming 4 1.2 규격 • Micro ATX 폼 팩터 플랫폼 • 8 세대 및 9 세대 Intel® Core 프로세서 지원 ( 소켓 1151) • 최대 95W 의 CPU 지원 • Digi Power design • 8 개 전원 위상 구조...
  • Seite 126 • HWA 인코드 / 디코드 : AVC/H.264, HEVC/H.265 8- 비트 , HEVC/H.265 10- 비트 , VP8, VP9 8- 비트 , VP9 10- 비트 ( 디 코딩 전용 ), MPEG2, MJPEG, VC-1 ( 디코딩 전용 ) • 이중 그래픽 출력 : HDMI 및 DisplayPort 1.2 •...
  • Seite 127 B365M Phantom Gaming 4 • LED 장착 RJ-45 LAN 포트 1 개 (ACT/LINK LED 및 SPEED LED) • HD 오디오 잭 : 후면 스피커 / 중앙 / 베이스 / 라인 입력 / 전 면 스피커 / 마이크 ( 골드 오디오 잭 ) •...
  • Seite 128 • 전압 모니터링 : +12V, +5V, +3.3V, CPU Vcore, DRAM, VPPM, PCH 1.0V, VCCSA, VCCST • Microsoft® Windows® 10 64- 비트 • FCC, CE 인증 • ErP/EuP 사용 가능 (ErP/EuP 사용 가능 전원공급장치 필요 ) * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 :http://www.asrock.com...
  • Seite 129 B365M Phantom Gaming 4 BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체의 오버클로 킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위험이 따른다는 것을 유념 하십시오 . 오버클로킹은 시스템 안정성에 영향을 주거나 심지어 시스템의 구성 요소와 장 치에 손상을 입힐 수도 있습니다 . 오버클로킹은 사용자 스스로 위험과 비용을 감수하고 해...
  • Seite 130 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . Clear CMOS 점퍼 단락 : Clear CMOS (CLRCMOS1) 단선 : 기본값 2 핀 점퍼 (1 페이지 , 23 번 항목 참조 ) CLRCMOS1 을...
  • Seite 131 B365M Phantom Gaming 4 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마십 시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩니다 . 섀시의 전원 버튼 , 리셋 버튼 , 시...
  • Seite 132 전원 LED 및 스피커 헤더 섀시 전원 LED 와 섀시 스피커를 SPEAKER DUMMY (7 핀 SPK_PLED1) 이 헤더에 연결하십시오 . DUMMY (1 페이지 , 12 번 항목 참조 ) PLED+ PLED+ PLED- 시리얼 ATA3 커넥터 이들 6 개의 SATA3 커넥터는 최대 (SATA3_0: 6.0 Gb/s 데이터...
  • Seite 133 B365M Phantom Gaming 4 전면 패널 오디오 헤더 이 헤더는 오디오 장치를 PRESENCE# MIC_RET (9 핀 HD_AUDIO1) 전면 오디오 패널에 연결하 OUT_RET (1 페이지 , 25 번 항목 참조 ) 는 데 사용됩니다 . OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와이어가...
  • Seite 134 CPU/ 워터 펌프 팬 커넥터 이 마더보드에는 4 핀 수냉식 FAN_SPEED_CONTROL CPU_FAN_SPEED (4 핀 CPU_FAN2/WP) CPU 팬 커넥터가 탑재되어 있 FAN_VOLTAGE (1 페이지 , 5 번 항목 참조 ) 습니다 . 3 핀 CPU 수냉식 쿨러 팬을 연결하려는 경우 핀 1-3 에 연결하십시오...
  • Seite 135 B365M Phantom Gaming 4 RGB LED 헤더 이 2 개의 RGB 헤더는 다양한 (4 핀 RGB_LED1) LED 조명 효과를 선택할 수 있 12V G R (1 페이지 , 22 번 항목 참조 ) 는 RGB LED 연장 케이블을 연 결하는 데 사용됩니다 .
  • Seite 136 VGA カードおよび CPU サポート一覧もご覧になれます。 ASRock ウェブサイ ト http://www.asrock.com. 1.1 パッケージの内容 • ASRock B365M Phantom Gaming 4 マザーボード (マイクロ ATX フォームファクター) • ASRock B365M Phantom Gaming 4 クイックインストールガイ ド • ASRock B365M Phantom Gaming 4 サポート CD • 1 x I/O パネルシールド...
  • Seite 137 B365M Phantom Gaming 4 1.2 仕様 • マイクロ ATX フォームファクター プラッ ト フォーム • 第 8 世代と第 9 世代 Intel® Core プロセッサーに対応 (ソケ ッ ト 1151) • 最大 95W までの CPU に対応 • デジタル電源設計 • 8 電源フェーズ設計 • Intel® ターボブースト 2.0 テク ノロジーをサポート...
  • Seite 138 • HWA エンコード / デコード : AVC/H.264、 HEVC/H.265 8- ビッ ト、 HEVC/H.265 10- ビッ ト、 VP8、 VP9 8- ビッ ト、 VP9 10- ビッ ト ( デコードのみ )、 MPEG2、 MJPEG、 VC-1 ( デコードのみ ) • デュアルグラフ ィ ックス出力 : HDMI、 および、 DisplayPort 1.2 •...
  • Seite 139 B365M Phantom Gaming 4 • LED 付き 1 x RJ-45 LAN ポート (ACT/LINK LED と SPEED LED) • HD オーディオジャック : リアスピーカー / センター / バス / ラ インイン / フロントスピーカー / マイク (ゴールドオーディオジ ャック) • 6 x SATA3 6.0 Gb/s コネクタ、 RAID (RAID 0、 RAID 1、 RAID 5、...
  • Seite 140 • ファンマルチ速度制御 : CPU、 CPU/ ウォーターポンプ、 シャ ーシ / ウォーターポンプファン • 電圧監視 : +12V、 +5V、 +3.3V、 CPU Vcore、 DRAM、 VPPM、 PCH 1.0V、 VCCSA、 VCCST • Microsoft® Windows® 10 64-bit 認証 • FCC、 CE • ErP/EuP Ready ( ErP/EuP 対応電源供給装置が必要です) * 商品詳細については、 当社ウェブサイ トをご覧く ださい。 http://www.asrock.com...
  • Seite 141 B365M Phantom Gaming 4 BIOS 設定の調整、 アンタイ ドオーバークロックテク ノロジーの適用、 サードパーティのオー バークロックツールの使用などを含む、 オーバークロックには、 一定のリスクを伴いますので ご注意く ださい。 オーバークロックするとシステムが不安定になったり、 システムのコンポー ネントやデバイスが破損するこ とがあります。 ご自分の責任で行ってく ださい。 弊社では、 オー バークロックによる破損の責任は負いかねますのでご了承く ださい。...
  • Seite 142 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピン に被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被さっ ていない場合には、 ジャンパーは 「オープン」 です。 CMOS クリアジャンパー ショート : CMOS のク リア オープン : デフォルト (CLRCMOS1) 2 ピンジャンパー (p.1、 No. 23 参照) CLRCMOS1 は、 CMOS のデータをクリアするこ とができます。 CMOS のデータには、 システムパスワード、 日付、 時間、 システム設定パラメーターなどのシステム設定情 報が含まれます。...
  • Seite 143 B365M Phantom Gaming 4 1.4 オンボードのヘッダーとコネクタ オンボードヘッダーとコネクタはジャンパーではありません。 これらヘッダーとコネクタには ジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクタにジャンパーキャップを 被せると、 マザーボードに物理損傷が起こるこ とがあります。 システムパネルヘッダー 電源ボタンを接続し、 ボタン PLED+ PLED- (9 ピン PANEL1) をリセッ トし、 下記のピン割り PWRBTN# (p.1、 No. 14 参照) 当てに従って、 シャーシのシス テムステータス表示ランプを RESET# このヘッダーにセッ トします。 HDLED- ケーブルを接続するときには、 HDLED+ ピンの+と−に気をつけてく...
  • Seite 144 電源 LED とスピーカーヘ シャーシ電源 LED とシャーシ SPEAKER DUMMY ッダー スピーカーをこのヘッダーに DUMMY (7 ピン SPK_PLED1) 接続してく ださい。 (p.1、 No. 12 参照) PLED+ PLED+ PLED- シリアル ATA3 コネクタ これら6 つの SATA3コネクター は、 最高 6.0 Gb/ 秒のデータ転 (SATA3_0: p.1、 No. 15 参照) 送速度で内部ストレージデバ イス用の...
  • Seite 145 B365M Phantom Gaming 4 フロントパネルオーディ このヘッダーは、 フロント PRESENCE# オヘッダー オーディオパネルにオー MIC_RET OUT_RET (9 ピン HD_AUDIO1) ディオデバイスを接続する (p.1、 No. 25 参照) ためのものです。 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. ハイディフィニションオーディオはジャックセンシングをサポートしていますが、 正しく機能 するためには、 シャーシのパネルワイヤーが HDA をサポートしているこ とが必要です。 お 使いのシステムを取り付けるには、 当社のマニュアルおよびシャーシのマニュアルの指示 に従ってく ださい。 2. AC 97 オーディオパネルを使用する場合には、 次のステップで、 前面パネルオーディオヘッ...
  • Seite 146 このマザーボードは 4 ピン水冷 CPU/ウォーターポンプフ FAN_SPEED_CONTROL CPU_FAN_SPEED ァンコネクタ 却 CPU ファンコネクタが装備さ FAN_VOLTAGE (4 ピン CPU_FAN2/WP) れています。 3 ピンの CPU 水冷 (p.1、 No. 5 参照) 却ファンを接続する場合には、 ピン 1-3 に接続してく ださい。 ATX 電源コネクタ このマザーボードは 24 ピン (24 ピン ATXPWR1) ATX 電源コネクタが装備さ (p.1、 No. 7 参照) れています。...
  • Seite 147 B365M Phantom Gaming 4 RGB LED ヘッダー これら 2 つの RGB ヘッダーを使 (4 ピン RGB_LED1) 用して RGB LED 延長ケーブル 12V G R (p.1、 No. 22 参照) を接続すれば、 ユーザーはさま ざまな LED ライティ ング効果を (4 ピン RGB_LED2) 選択できます。 (p.1、 No. 9 参照)...
  • Seite 148 外进行通知。如果您需要与此主板相关的技术支持,请访问我们的网站以具体了解所 用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。 华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 B365M Phantom Gaming 4 主板(Micro ATX 规格尺寸) • 华擎 B365M Phantom Gaming 4 快速安装指南 • 华擎 B365M Phantom Gaming 4 支持光盘 • 1 x I/O 面板 • 2 x 串行 ATA (SATA) 数据线(选购)...
  • Seite 149 B365M Phantom Gaming 4 1.2 规格 • Micro ATX 规格尺寸 平台 • 支持第 8 代和第 9 代 Intel® Core 处理器(插座 1151) • 支持最高 95W 的 CPU • Digi Power design • 8 电源相设计 • 支持 Intel® Turbo Boost 2.0 技术...
  • Seite 150 • HWA 编码 / 解码 : AVC/H.264、HEVC/H.265 8-bit、HEVC/ H.265 10-bit、VP8、VP9 8-bit、VP9 10-bit ( 仅解码 )、 MPEG2、MJPEG、VC-1 ( 仅解码 ) • 双图形输出 : HDMI 和 DisplayPort 1.2 • 支持 HDMI 1.4,30Hz 时最大分辨率达 4K x 2K (4096x2160) • 支持 DisplayPort 1.2,60Hz 时最大分辨率达 4K x 2K (4096x2304) •...
  • Seite 151 B365M Phantom Gaming 4 • 1 x RJ-45 LAN 端口,带 LED(ACT/LINK LED 和 SPEED LED) • 高清音频插孔 : 后扬声器 / 中央 / 低音 / 线路输入 / 前扬声器 / 麦克风 ( 金色音频插孔 ) • 6 x SATA3 6.0 Gb/s 接口,支持 RAID(RAID 0、RAID 1、...
  • Seite 152 • 风扇转速计 : CPU、CPU/ 水泵、机箱 / 水泵风扇 • 静音风扇(根据 CPU 温度自动调整机箱风扇速度): CPU、 CPU/ 水泵、机箱 / 水泵风扇 • 风扇多种速度控制 : CPU、CPU/ 水泵、机箱 / 水泵风扇 • 电压监控:+12V、+5V、+3.3V、CPU Vcore、DRAM、 VPPM、PCH 1.0V、VCCSA、VCCST • Microsoft® Windows® 10 64-bit 操作系统 • FCC、CE 认证 • ErP/EuP 支持(需要支持 ErP/EuP 的电源) * 有关详细产品信息,请访问我们的网站:http://www.asrock.com...
  • Seite 153 B365M Phantom Gaming 4 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”,或使用第 三方超频工具。超频可能会影响到系统的稳定性,甚至对系统的组件和设备造成损坏。 执行这项工作您应自担风险和费用。我们对由于超频而造成的损坏概不负责。...
  • Seite 154 1.3 跳线设置 此图显示如何设置跳线。将跳线帽装到这些针脚上时,跳线 “短接”。 如果这些针脚上没有装跳线帽,跳线 “开路”。 清除 CMOS 跳线 短接 : 清除 CMOS (CLRCMOS1) 开路 : 默认 2 针跳线 (见第 1 页,第 23 个) CLRCMOS1 允许您清除 CMOS 中的数据。CMOS 中的数据包括系统设置信息, 如系统密码、日期、时间和系统设置参数。要清除和重置系统参数为默认设置, 请关闭计算机,拔下电源线插头,然后使用跳线帽短接 CLRCMOS1 上的针脚 3 秒。请记住在清除 CMOS 后取下跳线帽。如果您需要在刚完成 BIOS 更新后清除 CMOS,则必须先启动系统,并在关闭后再执行清除 CMOS 操作。...
  • Seite 155 B365M Phantom Gaming 4 1.4 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。 将跳线帽装到这些接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配,将机 PLED+ PLED- (9 针 PANEL1) 箱上的电源按钮、重置按钮 PWRBTN# (见第 1 页, 第 14 个) 和系统状态指示灯连接到此 接脚。在连接线缆前请记下 RESET# 正负针脚。 HDLED- HDLED+ PWRBTN(电源按钮): 连接到机箱前面板上的电源按钮。您可以配置使用电源按钮关闭系统的方式。 RESET(重置按钮): 连接到机箱前面板上的重置按钮。如果计算机死机,无法执行正常重新启动,按重置按钮 重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系统处在 S1/S3 睡眠状态时,此...
  • Seite 156 电源 LED 和扬声器接脚 请将机箱电源 LED 和机箱扬 SPEAKER DUMMY (7 针 SPK_PLED1) 声器连接到此接脚。 DUMMY (见第 1 页,第 12 个) PLED+ PLED+ PLED- 串行 ATA3 接口 这六个 SATA3 接口支持最高 (SATA3_0: 6.0 Gb/s 数据传输速率的内部 见第 1 页, 第 15 个) 存储设备的 SATA 数据线。 (SATA3_1: * 如果...
  • Seite 157 B365M Phantom Gaming 4 前面板音频接脚 此接脚用于将音频设备连 PRESENCE# (9 针 HD_AUDIO1) MIC_RET 接到前音频面板。 OUT_RET (见第 1 页,第 25 个) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。请按照我 们的手册和机箱手册的说明安装系统。 2. 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚: A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。...
  • Seite 158 CPU/ 水泵风扇接口 此主板提供 4 针水冷风扇接 FAN_SPEED_CONTROL CPU_FAN_SPEED (4 针 CPU_FAN2/WP) 口。如果您打算连接 3 针 CPU FAN_VOLTAGE (见第 1 页, 第 5 个) 水冷风扇,请将它连接到针脚 1-3。 ATX 电源接口 此主板提供 24 针 ATX 电源 (24 针 ATXPWR1) 接口。要使用 20 针 ATX 电 (见第 1 页,第 7 个) 源,请沿针脚...
  • Seite 159 B365M Phantom Gaming 4 RGB LED 接脚 这两个 RGB 接脚用于连接 RGB (4 针 RGB_LED1) LED 延长线,可让用户选择不 12V G R (见第 1 页,第 22 个) 同的 LED 灯光效果。 注意:RGB LED 线安装方向切 (4 针 RGB_LED2) 勿错误,否则,线缆会损坏。 (见第 1 页,第 9 个) * 请参考第 35 页了解这个接脚...
  • Seite 160 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准 规定的限量要求,然该部件仍符合欧盟指令...
  • Seite 161 本文件有任何修改,可至華擎網站逕行取得更新版本,不另外通知。若您需要與本主機 板相關的技術支援,請上我們的網站瞭解有關您使用機型的特定資訊。您也可以在華擎 網站找到最新的 VGA 卡及 CPU 支援清單。華擎網站 http://www.asrock.com. 1.1 包裝內容 • 華擎 B365M Phantom Gaming 4 主機板(Micro ATX 尺寸) • 華擎 B365M Phantom Gaming 4 快速安裝指南 • 華擎 B365M Phantom Gaming 4 支援光碟 • 1 x I/O 面板外罩 • 2 x Serial ATA (SATA) 資料纜線(選用)...
  • Seite 162 1.2 規格 • Micro ATX 尺寸 平台 • 支援第 9 代及第 8 代 Intel® Core 處理器 (Socket 1151) • 支援最高 95W CPU • Digi Power design • 8 電源相位設計 • 支援 Intel® Turbo Boost 2.0 技術 • Intel® B365 晶片組 •...
  • Seite 163 B365M Phantom Gaming 4 • HWA 編碼 / 解碼:AVC/H.264、HEVC/H.265 8 位元、 HEVC/H.265 10 位元、VP8、VP9 8 位元、VP9 10 位元 ( 僅 解碼 )、MPEG2、MJPEG、VC-1 ( 僅解碼 ) • 雙圖形輸出:HDMI 及 DisplayPort 1.2 • 最高支援 4K x 2K (4096x2160) @ 30Hz 解析度的 HDMI 1.4 •...
  • Seite 164 • 1 x RJ-45 LAN 連接埠,含 LED(ACT/LINK LED 及 SPEED LED) • HD 音訊插孔:後置喇叭 / 中置 / 低音 / 線路輸入 / 前置喇 叭 / 麥克風(金色音訊插孔) • 6 x SATA3 6.0 Gb/s 接頭支援 RAID(RAID 0、RAID 1、 儲存裝置 RAID 5、RAID 10、Intel 快速儲存技術 17)、NCQ、AHCI 及熱插拔...
  • Seite 165 B365M Phantom Gaming 4 • 1 x 24 pin ATX 電源接頭 • 1 x 8 pin 12V 電源接頭 • 1 x 前面板音訊接頭 • 2 x USB 2.0 排針(支援 4 個 USB 2.0 連接埠) (支援靜電保護) • 1 x USB 3.1 Gen1 排針(支援 2 個 USB 3.1 Gen1 連接埠)...
  • Seite 166 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、採用自由 超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定性,或者甚至會對 您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成本。我們對於因超頻所造成 的可能損害概不負責。...
  • Seite 167 B365M Phantom Gaming 4 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時,該跳線為「短路」。若沒 有跳線帽套在針腳上,該跳線為「開啟」。 清除 CMOS 跳線 短路:清除 CMOS (CLRCMOS1) 開啟:預設 2-pin 跳線 (請參閱第 1 頁,編號 23) 您可利用 CLRCMOS1 清除 CMOS 中的資料。 CMOS 中的資料包含系統設定資訊, 如系統密碼、日期、時間及系統設定參數。若要清除並重設系統參數為預設設定, 請先關閉電腦電源及拔下電源線,然後使用跳線蓋讓 CLRCMOS1 上的針腳短路 約 3 秒。請牢記,務必在清除 CMOS 後取下跳線蓋。若您需在更新 BIOS 後立即 清除 CMOS,則必須先重新啟動系統,然後於進行清除 CMOS 動作前關機。...
  • Seite 168 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。 將跳線帽套在排針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排列將機 PLED+ PLED- (9-pin PANEL1) PWRBTN# 殼上的電源按鈕、重設按鈕 (請參閱第 1 頁, 編號 14) 及系統狀態指示燈連接至此 排針。在連接纜線之前請注 RESET# 意正負針腳。 HDLED- HDLED+ PWRBTN ( 電源按鈕 ): 連接至機殼前面板上的電源按鈕。您可設定使用電源按鈕關閉系統電源的方式。 RESET ( 重設按鈕 ): 接至機殼前面板上的重設按鈕。若電腦凍結且無法執行正常重新啟動,按下重設按鈕即 可重新啟動電腦。 PLED ( 系統電源 LED): 連接至機殼前面板上的電源狀態指示燈。系統正在運作時,此 LED 會亮起。系統進入 S1/ S3 睡眠狀態時,...
  • Seite 169 B365M Phantom Gaming 4 電源 LED 及喇叭排針 請將機殼電源 LED 及機殼喇 SPEAKER DUMMY (7-pin SPK_PLED1) 叭連接至此排針。 DUMMY (請參閱第 1 頁,編號 12) PLED+ PLED+ PLED- Serial ATA3 接頭 這六組 SATA3 接頭皆支援內 (SATA3_0: 部儲存裝置的 SATA 資料纜 請參閱第 1 頁,編號 15) 線,最高可達 6.0 Gb/s 資料傳...
  • Seite 170 前面板音訊排針 本排針適用於連接音訊裝 PRESENCE# (9-pin HD_AUDIO1) MIC_RET 置至前面板音訊。 OUT_RET (請參閱第 1 頁,編號 25) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必須支援 HDA 才能正確運作。請依本手冊及機殼手冊說明安裝系統。 2. 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針: A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。 C.
  • Seite 171 B365M Phantom Gaming 4 CPU /水冷幫浦風扇接頭 本主機板配備 4-Pin 水冷 CPU (4-pin CPU_FAN2/WP) 風扇接頭。若您計畫連接 3-Pin (請參閱第 1 頁, 編號 5) CPU 水冷風扇,請接至 Pin FAN_VOLTAGE 1-3。 CPU_F AN_SPEED FAN_SPEED_CONTROL ATX 電源接頭 本主機板配備一組 24-pin (24-pin ATXPWR1) ATX 電源接頭。若要使用 (請參閱第 1 頁,編號 7) 20-pin ATX 電源供應器,...
  • Seite 172 RGB LED 排針 這兩個 RGB 排針用於連接 RGB (4-pin RGB_LED1) LED 延長線,可供使用者選擇 12V G R (請參閱第 1 頁,編號 22) 各種 LED 照明效果。 警告:切勿以錯誤方向安裝 (4-pin RGB_LED2) RGB LED 纜線,否則纜線可能 (請參閱第 1 頁,編號 9) 損壞。 * 關於這種排針的詳細說明,請 參閱第 35 頁。 可定址 LED 排針 此排針用於連接可讓使用者選...
  • Seite 173 B365M Phantom Gaming 4 Spesifikasi Platform • Bentuk dan Ukuran Micro ATX • Mendukung Prosesor Generasi ke-8 & Generasi ke-9 Intel® Core (Socket 1151) • Mendukung CPU hingga 95W • Desain Digi Power • Desain 8 Fase Daya • Mendukung Teknologi Intel® Turbo Boost 2.0 Chipset • Intel®...
  • Seite 174 • Encode/Decode HWA: AVC/H.264, HEVC/H.265 8-bit, HEVC/ H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (hanya Decode), MPEG2, MJPEG, VC-1 (hanya Decode) • Output grafis ganda: HDMI dan DisplayPort 1.2 • Mendukung HDMI 1.4 dengan resolusi maksimum hingga 4K x 2K (4096x2160) @ 30Hz • Mendukung DisplayPort 1.2 dengan resolusi maksimum hingga 4K x 2K (4096x2304) @ 60Hz • Mendukung Auto Lip Sync, Kedalaman Warna (12bpc),...
  • Seite 175 B365M Phantom Gaming 4 • 1 x Port LAN RJ-45 dengan LED (LED ACT/LINK dan LED SPEED) • Soket Audio HD: Speaker Belakang / Tengah / Bass / Saluran masuk / Speaker Depan / Mikrofon (Soket Audio Berwarna Emas) Penyimpanan • 6x Konektor SATA3 6,0 Gb/s, mendukung RAID (RAID 0,...
  • Seite 176 • Pemantauan tegangan: +12V, +5V, +3,3V, CPU Vcore, DRAM, VPPM, PCH 1,0V, VCCSA, VCCST • Microsoft® Windows® 10 64-bit Sertifikasi • FCC, CE • Mendukung ErP/EuP (memerlukan catu daya untuk ErP/EuP) * Untuk informasi rinci tentang produk, kunjungi situs web kami:http://www.asrock.com...
  • Seite 177 B365M Phantom Gaming 4 Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat bantu overclocking pihak ketiga. Overclocking dapat mempengaruhi stabilitas sistem, atau bahkan mengakibatkan kerusakan komponen dan perangkat sistem. Risiko dan biaya apa pun menjadi tanggungan Anda.
  • Seite 178: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
  • Seite 179: Declaration Of Conformity

    13848 Magnolia Ave, Chino, CA91710 Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product Product Name : Motherboard B365M Phantom Gaming 4 Model Number : Conforms to the following speci cations: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: is device complies with part 15 of the FCC Rules. Operation is subject to the...
  • Seite 180: Eu Declaration Of Conformity

    EU Declaration of Conformity For the following equipment: Motherboard (Product Name) B365M Phantom Gaming 4 / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) EMC —Directive 2014/30/EU (from April 20th, 2016)

Inhaltsverzeichnis