Before Using This Printer - Sony UP-D898DC Bedienungsanleitung

Specifications
Power Requirements
12 V to 24 V DC
Input Current
8.2 A to 3.7 A
Operating Temperature
5 °C to 40 °C (41 °F to 104 °F)
Operating Humidity
20% to 80% (no condensation
allowed)
Operating Pressure
700 hPa to 1,060 hPa
Storage and Transport Temperature
–20 °C to +60 °C
(–4 °F to +140 °F)
Storage and Transport Humidity
20% to 80% (no condensation
allowed)
Storage and Transport Pressure
700 hPa to 1,060 hPa
Dimensions 154 × 88 × 165 mm (w/h/d)
(6 1/8 × 3 1/2 × 6 1/2 inches)
Mass 1.8 kg (3 lb 15 oz) (printer only)
Thermal head
Thin-film thermal head, 1280 dots
Gradation 256-level gradation (8-bit)
Picture size 320 × 100 mm (max.)
Printing speed
About 1.9 sec./image
(960 × 1280 dots)
(printing at the high speed)
About 3.3 sec./image
(960 × 1280 dots)
(printing at the normal speed)
Picture elements
4096 × 1280 dots (max.)
Dot density H: 100 mm/1280 dots = 0.078
V: 100 mm/1280 dots = 0.078
Square dots
Interface Hi-Speed USB (USB 2.0)
Accessories provided
Thermal head cleaning sheet (1)
CD-ROM (including multi-lingual
Instructions for Use, Readme
and printer driver) (1)

Before Using this Printer (1)

Service Contact List (1)
European Representative (1)
Optional accessories
Thermal Print Media
UPP-110HD (High Density)
UPP-110HG (High Glossy)
UPP-110S (High Quality)
Medical Specifications
Protection against harmful ingress
of water:
Ordinary
Degree of safety in the presence of
a flammable anesthetic mixture
with air or with oxygen or
nitrous oxide:
Not suitable for use in the
presence of a flammable
anesthetic mixture with air or
with oxygen or nitrous oxide
Mode of operation:
Continuous
The design and these specifications are subject to
change without prior notification.
13
Specifications
GB