Storing Of Food; Usable Capacity; Temperature Indicator - DeDietrich KISDDW00FF Bedienungsanleitung

en

Storing of food

Take note of the cold zones
in the refrigerating zone!
Due to the air circulation in the
refrigerating zone, zones with different
temperatures are produced:
S Coldest zones
is between the arrow stamped on the
side and the glass shelf situated below,
Fig. 4.
Note: Store perishable food (e.g. fish,
sausage, meat) in the coldest zones.
S Warmest zone
is at the very top of the door.
Note: Store the following in the warmest
zone, e.g. cheese and butter. When
serving, the cheese keeps it aroma and
the butter remains spreadable.
When storing the food, note
that food is well wrapped or covered over.
In this way, the aroma, colour and
freshness remain. Apart from which, the
transfer of taste and dying of plastic parts
is avoided.
We recommend that you arrange the
food inside the refrigerator as follows:
S in the freezer compartment:
deep frozen goods, ice cubes,
ice cream
S on the shelves in the main
refrigerator section (from the top
down): bakery products, ready to eat
items, dairy products, meat and salami
S in the vegetable containers:
vegetables, lettuce, fruit
28
S in the door racks (from the top down):
butter, cheese, eggs, tubes, small
bottles, large bottles, milk and fruit juice
cartons.

Usable capacity

Information on the usable capacity can be
found inside your appliance on the rating
plate.

Temperature indicator

(Not all models)
Do not expose the temperature indicator
to direct sunlight and do not place in your
mouth.
The temperature indicator indicates
temperatures below +4 °C and is used
to determine the required setting of the
temperature controller. Set the
temperature controller between 2 and 3
depending on the ambient temperature.
Select +4 °C or colder for a
degree precision setting.
After approx. 12 hours, when the
temperature has dropped below +4 °C,
the colour of the temperature indicator
changes from black to green and "O.K."
is also indicated (if this does not occur,
gradually set the temperature selector
colder).
Correct setting Temperature too
high, set
temperature
controller colder