Husqvarna LC 141iV Bedienungsanweisung Seite 13

• Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
• Use personal protective
equipment. Refer to
protective equipment on page
14 .
• Make sure that you know how
to stop the motor quickly in an
emergency.
• Do not operate the product in
rain or wet conditions. The
risk of electrical shock
increases if water enters the
product.
• Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
• Make sure that the blade
does not hit objects such as
stones and roots. This can do
damage to the blade and
bend the motor shaft. A bent
axle causes heavy vibration
and a very high risk that the
blade becomes loose.
• If the blade hits an object or if
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery
(model LC 141iV and
LC 141i) or disconnect the
power cord (model LC 141C).
Examine the product for
919 - 003 - 23.10.2019
• Never attach the motor brake
Personal
• Put the product on a stable,
• Always stay behind the
• Let all the wheels stay on the
• Do not tilt the product when
• Be careful when you pull the
• Never lift up the product when
• Do not walk rearward when
• Stop the motor when you
damages. Repair damages or
let an authorised service
agent do the repair.
handle permanently to the
handle when the motor is
started.
flat surface and start it. Make
sure that the blade does not
hit the ground or other
objects.
product when you operate it.
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
the motor is started.
product rearward.
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery
(model LC 141iV and
LC 141i) or disconnect the
power cord (model LC 141C).
you operate the product.
move across areas without
grass, for example paths
13