Rotary Hammer Safety Warnings - Makita HR4501C Bedienungsanleitung

Model HR4510C
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HR4511C
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Rotary Hammer
Model No./ Type: HR4501C, HR4510C, HR4511C
are of series production and
Conforms to the following European Directives:
2006/42/EC
2
) : 9.5 m/s
h,HD
2
2
) : 8.5 m/s
h,CHeq
2
2
) : 8.5 m/s
h,CHeq
2
2
) : 7.5 m/s
h,HD
2
2
) : 7.0 m/s
h,CHeq
2
2
) : 7.5 m/s
h,CHeq
2
ENG901-1
ENH101-16
as the responsible
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
000230
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
ROTARY HAMMER SAFETY
WARNINGS
1. Wear ear protectors. Exposure to noise can
cause hearing loss.
2. Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
3. Hold power
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4. Wear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary eye or
sun glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
5. Be sure the bit is secured in place before
operation.
6. Under normal operation, the tool is designed
to produce vibration. The screws can come
loose easily, causing a breakdown or accident.
Check tightness of screws carefully before
operation.
5
30.1.2009
Tomoyasu Kato
Director
tool by insulated
GEA010-1
GEB007-7
gripping