Sander Safety Warnings; Vibration And Noise Reduction - Parkside PAMFWP 20-Li B2 Bedienungs- Und Sicherheitshinweise

2) Use power tools only with
specifically designated battery
packs. Use of any other battery packs may
create a risk of injury and fire .
3) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire .
4) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns .
5) Do not use a battery pack
for tool that is damaged or
modified. Damaged or modified batteries
exhibit unpredictable behaviour resulting in
fire, explosion or risk of injury .
6) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire or
temperature above 130 °C may cause
explosion .
7) Follow all charging instruction and
do not charge the battery pack or
tool outside the temperature range
specified in the instruction. Charging
improperly or at temperatures outside the
specified range may damage the battery
and increase the risk of the fire .
12 GB
Service
Have your power tool serviced by
1)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained .
2) Never service damaged battery
packs. Service of battery packs should be
only be performed by the manufactured or
authorized service providers .
˜ Sander safety warnings
m
WARNING!
Dust from materials such as lead paint,
u
some types of wood, and metal can be
harmful to your health .
Contact with or inhaling this type of
u
dust can present a danger to the user or
persons nearby .
m
WARNING!
Wear safety glasses and a dust mask!
˜ Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well
as wear personal protective equipment .