Heating Mode - Autoclima U-GO Betriebsanleitung

ENGLISH
HEATING MODE: connect 1 flexible tubing (B) between one outlet air nozzle (1 or 2) and opening 3; the unused
outlet air nozzle (1 or 2) must be sealed with the supplied lid (D) placed in the entrance nozzles (C). Warm air
will exit from opening 4.
This mode does not use the snorkel (E).
If you wish to ventilate air remotely, connect another supplied flexible tubing (B), securing it to opening 4.
7.0 - OPERATION
The operation of "U-GO" can be managed directly from the control panel or remotely by using the remote control.
The remote control manages all main functions, but setting adjustments can be performed only through the
control panel.
WARNING: changing the standard settings must be carried out only by qualified personnel. Any change
performed without the proper skills may cause damage to "U-GO" and/or to the vehicle.
35/78