Klarstein Hot Spring plus Benutzerhandbuch Seite 23

5
Water dispense.
• Press the "Safety Child Lock"
button to unlock the water dispense
function. After the indicator is on,
press and hold the dispense button.
The safety lock will auto restart if no
operation for 10 seconds.
• Beware water flow easily increases
or splashes when dispensing if
water level decreases.
1. Boil water
• Do not open the lid while boiling.
• Do not refill water while boiling.
• Do not cover the steam port.
• Beware of hot steam to avoid scalding.
1. Insert the mains plug into the socket. The
indicating that the appliance is in standby mode.
2. Press the "Reboil" button to start boiling water. When the water has been heated to
100 °C, the holding state indicator flashes for 60 seconds. When the indicator turns
off, the appliance is in warm mode.
3. Press the "Reboil" button for 5 seconds, the appliance switches to standby mode.
6
Refill water.
• Water easily overflows when
boiling. Make sure the lid is well
closed.
icon will appear on the LED display
EN
23