Parts List; Electrical Components - Thetford COMPASS Short PREMIUM PLUS Bedienungs- Und Einbauanleitung

Parts List

Please begin by checking to see that all parts/accessories were included in your Compass package:
■ 1 – Tecma Compass toilet (white/bone, 12V/24V)
■ 1 – Wall switch and controller
■ 1 – Black wall switch bezel
■ 1 – Bone wall switch bezel
■ 2 – 1/4 10 x 2.5" stainless steel lag screws
■ 2 – 1/4" stainless steel washers
■ 2 – Plastic washers
■ 2 – Bolt caps
■ 2 – Hose clamps – 1 1/4"- 2", stainless
■ 1 – Hose clamps (water supply)
■ 1 – Full Tank senso
■ 1 – Lower Discharge Check Valve (with straight and elbow fittings)
■ 1 – Installation/Owner's Manual
■ 1 – Wall Switch Template
Supplies & Materials
Needed to complete toilet installation:
Water Supply Kits (one kit required)
■ 12V or 24V Raw Water Pump Kit
■ 12V or 24V Solenoid Valve
■ Raw Water Fitting Kit
Plumbing Components
■ In-line Strainer
■ 3/4"-diameter minimum Vented Loop – if required
■ 1-1/2"-diameter minimum Vented Loop – if required
■ 3/4"-diameter Marine Water Supply Hose
■ 1-1/2"-diameter Marine Discharge Hose
■ 1-1/2" straight coupling (as needed)
■ 1-1/2" 90° coupling (as needed)

Electrical Components

■ Wiring to toilet system power
■ Wiring to Full Tank Sensor
■ Wiring to Optional Tank Mid-Level Sensor
■ Wiring from electronic controller to water pump (raw water installations)
■ Wiring Harness Connectors (Model Dependant)
Supplies
■ Silicone caulk (white or clear)
Tecma Compass Short PREMIUM Owner's & Installation
22
www.thetfordmarine.com