Week timer display
Weekday: Displays the currently
selected day during input.
T1/T2:
2 heating
periods can
be set per
day. Here
you can see
which period is
currently set.
SAFETY CUT-OUT
This appliance is fitted with a safety cut-off which will operate if the fire overheats (e.g.
due to blocked air vents). For safety reasons, the fire will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect to the mains supply and switch on the appliance.
Time display:
Displays the currently
selected time during
input.
On/Off: Shows
whether the set timer
is On or Off.
EN
25