Klarstein Blanca Handbuch Seite 24

EN
24
Open The fire will operate for 30 mins. If after 30 minutes of
Window operation the room temperature is below 5 °C, the heater will
Detection assume a window is open. The heating function will be turned
off to conserve energy, and the alarm will sound.
Week Your fireplace includes a 7 day timer, which allows you to
Timer set two periods of operation per day. The fire will operate
Button with the previously used settings for the heating level, desired
temperature, and flame colour.
To set the timer press the week timer button. The unit will
display the day, period, and if you are setting the On or Off
time. For each period both the On and Off times must be set.
For each Period:
1 Set the On hour value using the arrow buttons, press the
week timer button to confirm.
2 Set the On minute value using the arrow buttons, press the
week timer button to confirm.
3 Set the Off hour value using the arrow buttons, press the
week timer button to confirm.
4 Set the Off minute value using the arrow buttons, press the
week timer button to confirm.
The fire will then move onto the next period / first period
of following day, allowing this to be programmed in the
same way. The days and periods can be scrolled through by
repeatedly pressing the week timer button.
To clear an operational period set the ON and OFF times to
the same value.