Klarstein DryFy Connect 30 Bedienungsanleitung Seite 28

EN
28
Setting up continuous water drainage (10034434 & 10034435)
When the pump function is deactivated:
Connect a drain line (outside diameter 13 mm) to the rear of the dehumidifier. Use a
garden hose with a standard 26.98 mm outer diameter thread and 1 1.5 TPI inclination.
Note: With water-based plate cleaning function. Remove the appliance drain plug
and clean the dehumidifier if you will not be using the appliance for an extended
period of time. Hold a cup under the drain plug when removing it to prevent the floor
from getting wet.
Option 1
Determine the position of the drain plug
and remove it. Connect a drain pipe with
a diameter of 13 mm.
Option 2
Determine the position of the drain plug
and remove it. Connect a garden hose.