Klarstein DryFy Connect 30 Bedienungsanleitung Seite 26

EN
26
Use without continuous water drainage
As soon as the water tank is full, the corresponding indicator light flashes (compressor,
fan, etc. stop operation). The unit beeps 10 times to remind the user that the water needs
to be drained.
Place both hands on each side of the rear
cover. Carefully pull the water tank out of
the unit and open the water tank cover on
the right side of the water tank. Pour the
water through the gap between the water
tank and the water tank cover.
Note: Empty the water tank when it is full. Before reinserting the water tank into the
unit, make sure that the float is movable or not.
Close the water tank cover and turn the
water tank handle downwards. Replace
the water tank in the appliance and
restart the dehumidifier.