NOCO Genius G1100EU Bedienungsanleitung Seite 7

Understanding Advanced Diagnostics.
Advanced Diagnostics displays charging errors by flashing Error LED and Standby LED flashing back and forth. The number of flashes between
each pulse denotes the potential Error Condition (except reverse polarity and low-voltage battery).
Error Reason/Solution
Single Flash
The battery will not hold a charge. Replace battery.
Double Flash
Battery short. Replace battery.
Triple Flash
Battery voltage is too high. Check the battery voltage and charge mode.
Error LED Solid Red Reverse battery connections.
Standby Solid Orange Battery voltage is too low to detect the battery. Jump start the battery to
raise the battery voltage.
Charging Times.
The estimated charge times are based on an average depth of discharge to a fully charged battery. Actual data may differ due to battery
conditions.
Battery Size
Ah
8
12
18
24
40
Approx. Time to Charge In Hours
6V
3.6
5.5
8.2
10.9
18.2
12V
3.6
5.5
8.2
10.9
18.2
EN