NOCO Genius G1100EU Bedienungsanleitung Seite 4

Mode Explanation
In Standby mode, the charger is not charging or providing any power to the battery. Energy Save is activated during this
Standby mode, drawing microscopic power from the electrical outlet. When selected, an orange LED will illuminate.
No Power
For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a white
12V
LED will illuminate.
NORM
14.5V | 1.1A | Up to 40Ah Batteries
12V
For charging 12-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue LED will
illuminate.
COLD/
AGM
14.8V | 1.1A | Up to 40Ah Batteries
6V
For charging 6-volt Wet Cell, Gel Cell,
Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a white LED will illuminate.
NORM
Press & Hold
7.25V | 1.1A | Up to 40Ah Batteries
12V
For charging 12-volt lithium-ion batteries, including lithium iron phosphate. When selected, a blue LED will illuminate.
LITHIUM
Press & Hold
14.2V | 1.1A | Up to 40Ah Batteries
Using 6V NORM. [Press & Hold]
6V NORM charge mode is designed for 6-volt lead-acid batteries only, like Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium
batteries. Consult the battery manufacturer before using this mode. CAUTION. THIS MODE IS FOR 6-VOLT LEAD-ACID BATTERIES ONLY.
Using 12V Lithium. [Press & Hold]
12V Lithium charge mode is designed for 12-volt lithium-ion batteries only, including lithium iron phosphate.
CAUTION. USE THIS MODE WITH CARE. THIS MODE IS FOR 12-VOLT LITHIUM BATTERIES ONLY. LITHIUM-ION BATTERIES ARE MADE
AND CONSTRUCTED IN DIFFERENT WAYS AND SOME MAY OR MAY NOT CONTAIN A BATTERY MANAGEMENT SYSTEM (BMS). CONSULT
THE LITHIUM BATTERY MANUFACTURER BEFORE CHARGING AND ASK FOR RECOMMENDED CHARGING RATES AND VOLTAGES. SOME
LITHIUM-ION BATTERIES MAY BE UNSTABLE AND UNSUITABLE FOR CHARGING. MAKE SURE YOU PURCHASE YOUR LITHIUM-ION
BATTERY FROM A WELL-KNOWN AND REPUTABLE BRAND.