Safety Devices; Standard Equipment; Optional Accessories - Index FDX HOT CUBE 16/200B Bedienungs- Und Wartungsanleitung

• Safety valve.
This duly calibrated maximum pressure valve discharges any excess pressure should an anomaly develop
in the pressure adjustment system.
• Boiler safety thermostat.
This stops the burner working should the hydraulic circuit overheat as a result of an anomaly in the
temperature adjustment system.
• Burner Control.
This stops the burner working should the combustion flame go out.
• Pressure control/ adjustment valve
This valve is calibrated by the Manufacturer so that the operating pressure can be adjusted using the
knob (8). It enables the pumped liquid to return to the pump's suction unit, preventing the development
of dangerous pressure levels when the gun is closed or when a pressure value is set over the maximum
level allowed.
• Dry-running control.
This prevents the possibility of the burner running without water.
• Gun Lever Blocking Device.
This safety device (23) allows to lock the lever (22) on the cleaner gun (24) in the closed position, preventing
accidental activation (Fig.4, position S).
• Pressure/temperature limiting device.
Device working as described in paragraph
Check the following parts are included in the packaging of the purchased product:
• high pressure cleaner
• high pressure delivery hose with the quick fit connector
• cleaner gun;
• lance pipe
• suction kit with: fitting, gasket and clamp
• Instructions manual - safety notifications;
• instructions manual – operation and maintenance
• the engine operating and maintenance manual;
• the declaration of conformity;
• guarantee certificate;
• booklet with details of service centers;
• nozzle cleaning pin
• oil plug with vent for pump
• oil plug with vent for gearbox
If you encounter any difficulties, please get in touch with your dealer or an authorized customer service
centre.
The following range of accessories can be added to the standard equipment supplied with the high
pressure cleaner:
• hose reel
• sandblasting lance: designed for sanding surfaces, removing rust, paint and lime scale deposits, etc;
• pipe flushing probe: designed for unblocking pipes and ducts;
• rotating nozzle lance: designed for the removal of stubborn dirt;
• foaming lance: designed for a more efficient distribution of detergent
• various types of lances and nozzles.

SAFETY DEVICES

"OPERATION IN STEAM MODE" .

STANDARD EQUIPMENT

OPTIONAL ACCESSORIES

EN
19