Parts Identification - Index FDX HOT CUBE 16/200B Bedienungs- Und Wartungsanleitung

• The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient
temperature of 16°C/61°F.
• The specifications and technical data are approximate. The manufacturer reserves the right to make all
changes to the machine it deems appropriate.
AGIP ROTRA MULTI THT corresponding oils:
U.T.T.O.
(Universal Tractor Trasmission Oil)
Massey-Ferguson M-1135
Mobil Mobilfluid 422
WARNING
• As far as engine lubricants are concerned, refer to the relative operating and maintenance manuals.
Refer to figures 1, 2, 3, 4, 5 and 6.
1. Ignition key
2. Handle/frame
3. Lance rest
4. Warning plates. Inform on residual risks and
PPE to be used
5. Identification plate. Indicates the serial number,
guaranteed sound power value (in compliance
with Directive 2000/14/EC) and main technical
characteristics
6. Lifting point
7. Fuel tank cap
8. Pressure adjustment knob
9. Water softener tank cap
1 0. Battery
1 1. Tray filter
1 2. Oil plug with vent for pump
1 3. Pressure gauge
1 4. Oil plug without vent
1 5. Oil plug with vent for gearbox
1 6. Water outlet connector
1 7. Water inlet connector
1 8. Water inlet filter
1 9. Pump
2 0. Exhaust
2 1. Lance pipe
2 2. Cleaner gun lever
2 3. Safety catch on cleaner gun lever
2 4. Cleaner gun
18

PARTS IDENTIFICATION

MEANING OF GRAPHIC SYMBOLS USED
Knob (28) position "0" (off): disables hot water operation of the cleaner. The high-
pressure cleaner can however be used with cold water
Knob (28) position "1" (on): enables hot water operation of the cleaner. The steam
function is also enabled with pressures below 32 bar/464 psi. In both cases, it is only
possible to turn the burner on by setting a suitable temperature value with the knob (41).
API GL-4
Ford M2C - 86 B
Ford M2C - 134 B/C
2 5. Water inlet hose support
2 6. Seal for water inlet hose suppor
27. Nozzle support head
2 8. Knob to enable hot water operation
2 9. Control panel
3 0. Hot water operation enable LED
3 1. Nozzle cleaning pin
3 2. Tray filter outlet ring nut
3 3. Tray filter body
3 4. Tray filter inlet ring nut
35. High pressure hose
3 6. High pressure hose quick fit connector
3 7. Double barrel lance knob
3 8. Gearbox oil level indicator
39. Swivel wheel
4 0. Swivel wheel brake
4 1. Knob for temperature adjustment
4 2. Pump oil level indicator
4 3. High pressure hose connector
4 4. Low fuel warning light
4 5. Battery LED
4 6. Engine oil LED
4 7. Water inlet filter cap
4 8. Steam Shutdown warning light
4 9. Burner Malfunction warning light
50. Suction hose grip
5 1. Water inlet filter cartridge
John Deere J20A
Esso Torque Fluid 62
Shell Donax TD