Modifications And Spare Parts - DAB GENIX Installations- Und Wartungsanleitungen

• Marking:
8. MANAGEMENT
8.1 Storage
All the pumps must be stored in a dry covered place, with possible con-
stant air humidity, free from vibrations and dust.
They are supplied in their original pack in which they must remain until the
time of installation.
8.2 Transport
Avoid subjecting the products to needless impacts and collisions.
8.3 Weight
The adhesive plate on the packaging indicates the total weight of the pump
9.

MODIFICATIONS AND SPARE PARTS

Any modification made without prior authorisation relieves the ma-
nufacturer of all responsibility. All the spare parts used in repairs
must be authentic and all accessories must be authorised by the
manufacturer, in order to ensure maximum safety of the machines
and of the systems in which they may be installed.
If the power supply cable of this appliance is damaged, the repair
must be carried out by specialised personnel to prevent all risks.
10. DISPOSAL
This product or its parts must be disposed of in an environment-friendly
manner and in compliance with the local regulations concerning the envi-
ronment; use public or private local waste collection systems.
GB
ENGLISH
13