Troubleshooting - FLORABEST FFGT 433 A1 Bedienungsanleitung Und Sicherheitshiweise


Remove the batteries from the transmitter (13) and
receiver (1) to prevent leaks.

Store the barbecue thermometer in a dry, cool, dust-
free place.

10. Troubleshooting

Not working

Are the batteries in the transmitter (13) and/or
receiver (1) empty? Insert new batteries where
applicable.
The light on the LCD display (2) is dim.

Are the batteries in the receiver (1) empty? Insert
new batteries where applicable.
The red LED (17) on the transmitter does not
come on.

Are the batteries in the transmitter (13) empty?
Insert new batteries where applicable.
The current core temperature (23) is shown
as "- - -" on the LCD display (2).

Check that the connector (15) for the temperature
sensor (14) is correctly inserted into the socket (16).
Insert it properly if not.

The transmitter (13) and receiver (1) are too far
apart. Move them closer together.

If necessary, switch the transmitter (13) and receiver
(1) off for about 3 seconds and then switch them
back on again. This should resolve the problem.
The LCD display (2) flashes with red back-
lighting, shows "HI" and a warning beep
sounds.

The maximum temperature for the temperature
sensor (14) has been exceeded. Press the "MEAT /
STOP" button (7) to stop the beeping and the
measurement.
FLORABEST FFGT 433 A1
English - 15