Position When In Use; Receiver (1); Transmitter (13) - FLORABEST FFGT 433 A1 Bedienungsanleitung Und Sicherheitshiweise

FLORABEST FFGT 433 A1

8.1 Position when in use

The range of the transmitter (13) is about
15 metres. Make sure the distance between
the transmitter (13) and the receiver (1) is not
too great. This would mean accurate
temperature measurement would not be
possible.

8.1.1 Receiver (1)


You can place the receiver (1) in the transmitter
(13).

You can use the belt clip (9) to affix the receiver (1)
to your belt or bag, for example.

The belt clip (9) has two built-in magnets. This
means you can also stick the receiver (1) to a
magnetic surface.

8.1.2 Transmitter (13)


There are two magnets on the bottom of the
transmitter (13). This means you can also stick the
transmitter (13) to a magnetic surface.

The velcro fasteners (21) supplied can also be used
to attach the transmitter (13) to the handle or base
of a barbecue, for example. Use either one or both
velcro fasteners (21) as required.
When positioning the transmitter (13), make
sure that you can easily reach the food whose
core temperature you wish to measure with
the temperature sensor (14) cable.
The transmitter (13) is made of plastic.
Therefore, do not affix it to parts of the handle
which get very hot, e.g. on the barbecue
cover or the charcoal dish. This could damage
the transmitter (13).
10 - English