Dab Radio Mode - auna 10034079 Bedienungsanleitung

EN
34

DAB RADIO MODE

Carefully extend the telescopic aerial.
Press the POWER button to turn on the unit, it will auto into DAB mode.
Auto Scan
1. Rotate the SOURCE knob to select "DAB MODE".( if unit not in DAB
mode).If this is the first time the unit has entered DAB Mode, it will
automatically start an 'Auto Scan' to search for available stations. (Once
DAB Mode has been used before, the unit will automatically select the
previously played station)
2. Press ENTER button to automatically start auto scan to search for
available station. During the scanning process, the lower line of the
display shows a bar graph indicating the progress of the scan.
Manual Scan
1. Rotate the SOURCE key on main unit to select "DAB MODE".
2. Press the  or  button to select "Manual tune", press the ENTER
button to enter the service menu.
3. Press  or  to tune in the desired channel. The graph will indicate the
signal strength.
4. Press MENU or [ ] to exit scan.
5. If no stations are found, please ensure the aerial is extended and test the
reception by doing another auto scan in a different location.
DRC(Dynamic Range Control)
Dynamic Range Control (also known as DRC) is a technology used to help
make quieter sounds easier to hear in a noisy environment.
1. In DAB mode, press the / button to select "DRC", press the ENTER
button to display "*" to the top right.
2. Press MENU to confirm the setting. The display will return to normal.
DRC OFF - DRC is switched off, broadcast DRC will be ignored.
DRC LOW - DRC level is set to 1/2 that sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Prune (To Remove Stations That are Listed But Unavailable)
In DAB mode, press  or  to display the "Prune" submenu, press ENTER
button to select the Prune option.