Inhaltsverzeichnis
Werbung
EN
OPERATION GUIDELINES
Vacuum cleaner assembly
Always disconnect the plug out of the electrical outlet before assembling or removing accessories!
1. Insert the aluminium tube into the main body of the cleaner until you heard a "click" sound (Fig. 1). To remove the
tube, press the nozzle release button and pull away from the main body (Fig. 2).
Fig. 1
2. Insert the turbo nozzle into the aluminium tube until you hear a "click" sound (Fig. 3). To remove the turbo nozzle,
press the nozzle release button and pull away from the main body (Fig. 4).
You can insert the turbo nozzle to the main body as described above.
Fig. 3
46
BATTERY INSTALLATION
Insert battery into the main body (Fig. 5) in such a way (Fig. 6) to prevent it from becoming loose. The battery is placed
correctly when you heard a sound. During the charging process the battery indicator blinks. When the battery is fully
charged, the battery indicator is illuminated.
To prolong the battery life, always charge the battery when the red light indicates a nearly empty battery.
Fig. 2
USE
Before installing the battery, check if it is fully charged.
1. Press the ON/OFF switch to turn the cleaner on.
2. You can regulate the speed with the speed control.
3. To turn the cleaner off, press the ON/OFF switch again.
ACCESSORIES
Select the accessories according to the nature of the surface to be cleaned.
Nozzle – suitable for bedding, fabric, sofa, etc.
Mini turbo nozzle – suitable for bed linen, fabric, sofa, etc.
Slot nozzle – suitable for wall corners, car cushioning, radiators, etc.
Fig. 4
Slot nozzle adaptor – suitable for bedding, fabric, sofa, etc.
Adaptor for corner cleaning – suitable for difficult to clean corners, gaps, etc.
VP6000
VP6000
Fig. 5
Fig. 6
EN
47
Werbung
Inhaltsverzeichnis
