Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FURTHER USE.
When sanding wood and metal surfaces coated with paints with lead additives, harmful or toxic dust may arise. Contact
or inhalation of the dust may endanger operator's or other persons' health. Use appropriate personal protection measures
such as filter masks and safety glasses. Use dust extraction system.
PRIOR TO SANDER OPERATION
●
During operation hold the sander firmly with both hands.
●
Ensure the abrasive paper does not touch processed material prior to switching the sander on.
●
Ensure the abrasive paper is well installed before switching the sander on.
●
Do not touch moving parts of the sander.
●
After switching off, do not put away the sander until all moving parts stop.
●
Use protective mask if the dust appears during sanding. Dust, which appears when sanding surfaces coated with lead-
based paint, some types of wood and metal, is harmful.
●
Pregnant women and children should not enter the room where lead-based paint is removed with the use of sander.
●
Do not eat, drink or smoke in the room where lead-based paint is removed with the sander.
●
Avoid using long extension cords.
WHEN OPERATING THE SANDER
●
Wear earmuff protectors and protection half-mask always when using the sander.
●
Sander is not designed for wet operation.
●
Ensure the switch is in the OFF position before plugging the sander to power supply.
●
Keep the power cord away from moving parts of the sander.
●
Use safety goggles or glasses when operating the sander above head.
●
When operating the sander do not apply excessive pressure that might stop the tool.
CONSTRUCTION AND USE
Orbital sanders are hand-operated power tools with insulation class II. Tools are driven by single-phase commutator
motors. Orbital sander is designed for sanding and polishing surfaces of wood, metal, plastic and similar materials, with the
use of sanding paper with appropriate gradation. Range of use covers repair and building works, and any work from the
range of individual, amateur activities (tinkering).
Do not use the sander for sanding surfaces that contain magnesium or asbestos, or covered with gypsum.
DESCRIPTION OF DRAWINGS PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1.
Additional handle
2.
Locking wheel for additional handle
3.
Switch lock button
4.
Dust container
5.
Switch
6.
Wheel for speed control
7.
Dust extraction outlet
8.
Backing pad
* Differences may appear between the product and drawing
INSTRUCTION MANUAL
ORBITAL SANDER
59G346
DETAILED SAFETY REGULATIONS
10
Werbung
Inhaltsverzeichnis
