Axis Q1615-E Mk II Installationsanleitung Seite 13

Housing LED
(fan and heater)
Green
Flashing green
Contact your Axis reseller for information about spare parts and troubleshooting.
Status LED Behavior for Focus Assistant
The status LED flashes when the Focus Assistant is active.
Color Indication
Red The image is out of focus.
Adjust the lens.
Amber The image is close to focus.
The lens needs fine tuning.
Green The image is in focus.
Buzzer Signal for Focus Assistant
Buzzer
Fast interval
Medium interval
Slow interval
Status LED Behavior and Buzzer Signal for Levelling Assistant
For information on the Function button used for levelling the camera, see Connectors and Buttons.
Press and hold the function button (2) for more than two seconds to level the camera.
• When the camera is level, both LEDs are steady green, and the beep is continuous.
• When the camera is not level, the LEDs flash a combination of red, green and orange, and
the beep occurs at slow intervals.
Both LEDs briefly flash green to indicate that the levelling is getting better.
AXIS Q1615-E Mk II Network Camera
Indication
Normal operation.
Single flash: Heater error
Double flash: Fan error
Triple flash: General error
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
13