Selecting A Pitch; Putting Up The Sail Sun Shade; Dismantling The Product; Cleaning - Crivit IAN 291566 Montage-Und Sicherheitshinweise

Selecting a Pitch

Ensure that the sail sun shade is
positioned so that it is sheltered
from the wind.
When choosing where to pitch
please remember that you will
need room for the guy ropes
outside the plan area of the sail
sun shade. Also ensure that there
is enough room for people to
pass by safely and that the guy
ropes do not present a trip
hazard.
Putting up the
sail sun shade
Remove the product from the
carry bag
8
Erect the product in accordance
with illustrations A to C.
Illustration A:
Complete 1 pole by connecting
x1 top pole
and x1 bottom pole
3
gether. Then complete another
pole.
Note: Please be cautious
when handling open pipe ends.
16 GB/IE
.
, x2 middle pole
4
to-
2
Illustration B:
Insert the tips of the top pole
into the corners of the sail sun
shade
1
sun shade
Illustration C:
5
Fasten the guy ropes
secure them in the ground by
the pegs
pegs
6
ground completely.
Secure the sail sun shade
tightening the guy ropes
a tension with the pegs
Tip: To better fix the sail sun
shade, please insert the pegs
in the ground at an angle of
6
45° degrees.

Dismantling the product

Disassemble the product in the
reverse order.
Please make sure all the parts
(e.g. pegs) have been removed
from the ground.

Cleaning

Remove dirt from the sail sun
shade with a soft sponge and
clean water.
and set up the sail
.
1
and
5
. Ensure that the
6
were inserted in the
6
4
by
1
with
5
.