Assembly - Crivit IAN 291566 Montage-Und Sicherheitshinweise

You should also
familiarise yourself
with the local fire
protection regula-
tions (e.g. camping
site, tent pitch).
Take note of the
effects of the
weather and
climate
Take down the sail
sun shade before
heavy snowfall or a
storm.
Damaged poles or
other components
should be replaced
by new ones.

Assembly

Note: Product assembly requires
at least 2 persons.
When choosing a location,
bear in mind that you will need
additional space beyond the
surface area of the sail sun shade
itself (approx. 430 x 350 cm)
for the guy ropes
between poles should be max.
430 cm. Please also make sure
that there is sufficient space
around the outside of the sail
sun shade and that no tripping
hazards are created.
Do not leave unattended in the
built-up state.
Dismantling of the product at
expected wind speeds of more
than 40 km/h (fresh wind, larger
branches and trees move, and
the wind is clearly audible).
Tip: Before embarking on your
trip, make yourself familiar with
the assembly instructions. Practice
putting up the sail sun shade and
check that all the parts are present
and defect free.
. Distance
5
GB/IE 15