Herunterladen Inhalt Inhalt Diese Seite drucken

Dave Smith Instruments Prophet '08 Bedienungsanleitung Seite 41

Inhaltsverzeichnis

Werbung

1011 nnnn
1011 nnnn
1011 nnnn
See sections below for additional Continuous Controller (CC) and Non-
registered Parameter Number (NRPN) messages received.
Transmitted Channel Messages
Status
Second
1000 nnnn
0kkkkkkk
1001 nnnn
0kkkkkkk
1011 nnnn
0vvvvvvv
1100 nnnn
0ppppppp
1101 nnnn
0vvvvvvv
1110 nnnn
0vvvvvvv
Notes:
0kkkkkkk
nnnn
0vvvvvvv
Transmitted Controller Messages
Status
Second
1011 nnnn
0000 0001
1011 nnnn
0000 0010
1011 nnnn
0000 0100
1011 nnnn
0000 0111
1011 nnnn
0100 1010
1011 nnnn
0000 1101
1011 nnnn
0010 0000
1011 nnnn
0100 0000
See sections below for additional Continuous Controller (CC) and Non-
registered Parameter Number (NRPN) messages transmitted.
Additional Continuous Controllers (CCs)
Transmitted/Received
The following table details how CCs are mapped onto the Prophet '08's
controls. They are transmitted when MIDI Parameter Send is set to CC in
Global, and recognized when received when MIDI Parameter Receive is set to
either CC or All in Global.
Parameter
Osc 1 Frequency
64
0vvvvvvv
123
0vvvvvvv
121
0vvvvvvv
Third
0000000
0vvvvvvv
0vvvvvvv
0vvvvvvv
Note number 0 – 127
Channel number 0 to 15 (MIDI channel 1-16). Ignored if MIDI
channel set to ALL
Value
Third
0vvvvvvv
0vvvvvvv
0vvvvvvv
0vvvvvvv
0vvvvvvv
0vvvvvvv
0vvvvvvv
0vvvvvvv
CC#
20
Damper pedal – holds envelopes in Sustain if
0100 0000 or higher
All Notes Off – clear all MIDI notes
Reset All Controllers – clears all MIDI controllers
to 0, MIDI volume to maximum
Description
Note Off.
Note On.
Control Change; see "Transmitted Controller
Messages" table following
Program change, 0 – 127 for Programs 1 – 128
within current Bank
Channel Pressure
Pitch Bend LS Byte then MS Byte
Description
Mod Wheel
Breath Controller – when assigned to Pedal/CV
Foot Controller – when assigned to Pedal/CV
Volume – when assigned to Pedal/CV
Brightness – when assigned to Pedal/CV
Expression – when assigned to Pedal/CV
Bank Select – 0 to 2
Damper pedal – sends 0 if off, 0100 0000 when
on
Osc 1 Freq Fine
Osc 1 Shape
21
22
41

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis