Parrot ASTEROID Bedienungsanleitung Seite 10

Radio
To select a f requency :
1. Press the SOURCE button until the
source is selected.
2. Press brief ly the
manually the radio station. Hold down the
buttons to tune to the next av ailable
radio station.
To get the list of all av ailable stations:
1. Press the SOURCE button until the
source is selected.
2. Press the button and select Fullscan.
To memorize a station:
1. Press the SOURCE button until the
source is selected.
2. Select the f requency manually or in
mode.
3. Press the button then select
presets.
> To select a stored station, select the
Presets mode.
iPod
Connect y our iPod using the iPod connector then press
the SOURCE button until the iPod source is selected.
7 English
USB storage device
1. Connect y our USB storage dev ice to the
Parrot ASTEROID using the USB cable or
Radio
the USB connectors on the back of the car
stereo
buttons to change
2. Press the SOURCE button until the USB
source is selected.
SD card
1. Remov e the Parrot ASTEROID f aceplate.
Radio
2. Insert the SD card into the appropriate slot
with the contact surf ace f acing down.
3. Reattach the f aceplate.
4. Press the SOURCE button until the SD
Radio
source is selected.
Fullscan
Analogue audio player
1. Connect the audio play er using the Jack
Add to
connector.
2. Press the SOURCE button until the Line in
source is selected.
3. Start play ing a song on y our audio play er.
Audio player connected via Bluetooth
Y ou can use the Parrot ASTEROID to listen to
songs stored on y our mobile phone or Bluetooth
audio dev ice. To do so, y our phone / audio
dev ice must support the Bluetooth A2DP prof ile
(Adv anced Audio Distribution Prof ile).
If y ou are using a Bluetooth audio play er f or the
f irst time, y ou hav e to pair both dev ices.
If both dev ices are already paired:
1. Press the SOURCE
Bluetooth Audio source is selected.
2. Start play ing a song on y our audio play er.
button until the