Setting A Parameter - Riello RS 68/EV Anleitungen Für Einbau, Betrieb Und Wartung

4.4

Setting a parameter

Find below the procedure to change the parameter P0004. Use this description as a guide for setting all other parameters. Parameters
marked with an "r" are read-only.
Step
1
Press
2
Press
3
Press
4
Press
5
Press
6
Press
First start-up
Action
to access the parameters.
until the parameter is displayed.
to access the parameter value level.
or to display the required value.
to confirm and save the value.
until r0000 is displayed.
13
GB
Resulting display
6112