Assembly - Riello RS 68/EV Anleitungen Für Einbau, Betrieb Und Wartung

3.1

Assembly

To assemble the Inverter, proceed as follows.
– Remove the rubber plugs placed under the Inverter and use
the relevant cable clamps supplied with the Kit (see Fig. 1).
– Open the motor box by undoing the 4 screws (1) and removing
the cover (2), (see Fig. 2).
Only 3010468
W2 U2 V2 W2 U2 V2
U1 V1 W1 U1 V1 W1
RS 300 RS 400 - 500 - 800
RS 400 - 500 /EV RS 68 - 120 - 130 - 160/EV
RS 650 - 800/EV RS 200 - 250 - 300/EV
RS 1000-1200/EV
– Shield as shown in Fig. 3
D8177
6112
Installation
D8178
Fig. 1
1
2
D8176
Fig. 2
Fig. 3
6
GB
– Connect the motor to the inverter by means of a shielded cable
(see Fig. 2 and Fig. 4) (Length = 25 m max.) type:
- FROH2R 4G2,5 450 / 750V for RS 68/EV
- FROH2R 4G4 450 / 750V for RS 120-130-160-200-250-
300-400/EV
- FROH2R 4G6 450 / 750V for RS 500
- FROH2R 4G10 450/750V for RLS 500
- FG70H2R 4G16-0.6/1kV for RS 650-800-1000-1200/EV
and for RLS 650-800-1000-1200/EV
RS 68-120-130-160-200-250-300-400-500-1000-1200/EV
RLS 500-650-800-1000-1200/EV
D8192
– Shield as shown in Fig. 3 and Fig. 5.
RS 68-120-130-160-200-250-300-400-500-1000-1200/EV
RLS 500-650-800-1000-1200/EV
D8180
Alarm
Communication with LMV
Motor cable
Fig. 4
Motor cable
Fig. 5