Specifications - Sony UWP-X5 Bedienungsanleitung

Specifications

Transmitter (UTX-B1)
Oscillator type
Crystal-controlled PLL synthesizer
Carrier frequencies
Model available in USA: 758 to
806 MHz
Model available in Europe: 798 to
862 MHz
Model available in Australia: 792
to 806 MHz
Operating frequency band
Model available in USA and
Europe: 24 MHz BW
Model available in Australia: 14
MHz BW
Pre-emphasis
50 µs
Frequency characteristics
50 Hz to 18 kHz
Signal-to-noise ratio
60 dB or more
Tone signal
32 kHz
Attenuation
0 to 21 dB, in 3-dB steps
Display
Channel, frequency, audio level,
RF level, accumulated battery
use time
Power requirements
3.0 V DC (two LR6/AA size
alkaline batteries)
Battery life
Approx. 6 hours (measured with
two Sony LR6/AA size alkaline
batteries at 25°C (77°F), with
output power of 30 mW)
Antenna
λ
1/4 wave length wire
Audio input connector
3.5-mm dia. mini jack
32 Specifications
Audio input level
–60 dBV to –39 dBV
RF output level
30 mW/5 mW selectable
Reference deviation
±5 kHz
Distortion
1.0% or less
Indicator
Power on
Dimensions
63 × 100 × 27 mm (2
inches) (w/h/d) (excluding the
8
antennas)
Mass Approx. 140 g (5 oz) including
batteries
Tuner (URX-M1)
Type of reception
Space diversity
Oscillator type
Crystal-controlled PLL synthesizer
Reception frequencies
1 1
/2 × 4 × 1 /