Power Supply; Inserting The Batteries - Sony UWP-X5 Bedienungsanleitung

a Ear clip
b Case
c Microphone cable
d Headband (supplied)
e Connector (mini phono plug with a
lock mechanism)
f Clip (supplied)
g Boom
h Capsule case
16

Power Supply

Power Supply
This section explains the power supply for
each component.
Diversity tuner module (URX-
M1)
When incorporated into another component
(e.g., MB-X6, SRP-X500P, etc.), the tuner
module draws its power from that
component.
For details on the power supply to the diversity tuner
module, refer to the operating instructions of the
component in which the diversity tuner module is
installed.
Body-pack transmitter (UTX-
B1)
The body-pack transmitter can be powered
by two LR6 (size AA) alkaline batteries for
about six hours of continuous operation (at
25 ºC (77ºF)). Details on inserting the
batteries and the battery condition
indication are given below:

Inserting the batteries

1
Slide the latches on both sides of the
transmitter at the same time and open
the battery compartment.
Latch