IKA RV 3 eco Bedienungsanleitung Seite 16

Risk of damage to glass vessels
If the glass vessel is not properly secured, it may fall off.
Z
Risk of damage through incorrect use of distillate
Z
Z
Z
/// Requirements for operators / users
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
16
Check that the glass vessel is securely fixed before operating the device.
Adapt the quantity and type of the distillation material to the size of the distillation
apparatus.
Check that the cooler is sufficiently effective
Monitor the flow of coolant at the cooler outlet.
Ensure that only qualified persons use the device.
Ensure that the applicable safety and accident prevention measures are observed
when processing hazardous materials.
Wear personal safety equipment in accordance with the hazard class of the medium
that is used.
Inform the user about possible danger due to contact with or inhalation of media
(e.g. poisonous liquids, gases, mist, vapours, dusts or biological or microbiological
materials).
Only work with media for which the energy input during processing is harmless. This
also needs to take into account other sources of energy such as, for example, light
irradiation.
Ensure that the specified settings on the rating plate coincide with the actual power
supply.
Ensure that the power socket used is earthed (grounded contact).
The outlet for the mains plug must be easily accessible.
Place device on an even, stable, clean, non-slip, dry, fire-resistant surface.
Ensure that there is sufficient space above the device as the glass assembly may
exceed the height of the device.
Set up the device so that ventilation slots are not covered.
Position the positive pressure outlet of the vacuum pump under a fume hood.
Make sure that the device is not operated while unattended.
Only operate the device under a hood closed on all sides or a comparable protective
device.
Refer to the operating instructions for the accessories.
Always check the device and accessories for damage prior to each use. Never use
damaged parts.