Treble And Bass Setting - LENCO IPD-5300 Handbuch

Radio Broadcast System Selection
In case the unit is moved to other countries with slightly different radio broadcast system, the unit
allows you to select USA, EU, Australia and Japan systems.
1. Set the unit to Power Off mode.
2. Press the SET button from the remote control repeatedly until the flashing indicator "EU",
"JP","AU" or "US" is seen.
3. Press the Up / Down
4. To save the settings and auto-exit the setting mode, wait for few seconds.
Note: The followings are the specifications of the three radio broadcast systems:
USA's Radio Broadcast System
FM 87.5 - 108 MHz, 0.1 MHz tuning step
AU and EU's Radio Broadcast System
FM 87.5 - 108 MHz, 0.05 MHz tuning step
Japan's Radio Broadcast System
FM 76.0 - 90 MHz , 0.1 MHz tuning step
When the unit is powered on (in iPhone/iPod, Aux-In or Radio mode), the unit allows you to select your
desired Bass and Treble level.
Bass setting:
1. Press the BASS +/- button from the remote control to adjust to the desired Bass level, the "BASS"
indicator blinks on display.
Treble setting:
2. Press the TREBLE +/- button from the remote control to adjust to the desired Treble level, the "TRE"
indicator blinks on display.
Exit Bass / Treble setting mode:
3. Wait for few seconds to exit Bass / Treble setting mode.
Radio Tuner Operation
button from the remote control to select one of the broadcasting systems.

Treble and Bass Setting

10